= Recovery manual of the GigE camera for end-users =
When a GigE camera is stopped in some reason, update of date and time on the GStreamer window is also stopped.

  [[attachment:GigE_movie.png|{{attachment:GigE_movie.png|a|width="500"}}]]

In this case, try to recover it with following procedures before calling experts.

  1. '''Open a MEDM screen for each camera.'''
    [[attachment:GigE_controller1.png|{{attachment:GigE_controller1.png|b|width="658"}}]]

  1. '''Choose "Recovery" -> "$(camera_name) status"'''
    * Then terminal window named as "{{{$(camera_name)}}} status" will be opened.
      [[attachment:GigE_status.png|{{attachment:GigE_status.png|c|width="858"}}]]
    * If the 2nd column is not {{{enabled}}} (you shouldn't be faced with such a case), please call experts.
    * Otherwise, proceed to the following steps.

  1. '''Back to the MEDM screen and choose "Log" -> "$(camera_name) log | tail -f"'''
    * Then a new terminal window named as "{{{$(camera_name)}}} log | tail -f" will be opened.
      [[attachment:GigE_controller2|{{attachment:GigE_controller2.png|d|width="658"}}]]

      [[attachment:GigE_log.png|{{attachment:GigE_log.png|e|width="858"}}]]

  1. '''Choose "Recovery" -> "restart $(camera_name)"'''
    * Then a new terminal window named as "restart {{{$(camera_name)}}}" will be opened.
      [[attachment:GigE_restart.png|{{attachment:GigE_restart.png|f|width="858"}}]]
  
  1. '''Input the password to the "restart $(camera_name)" window'''
    * A restart process for the camera service will be started soon.
    * Please see the "{{{$(camera_name)}}} log | tail -f" window during the restart process.

  1. '''If the GigE movie is still dead, please call experts.'''
    * We may need to unplug and re-plug the LAN cable in the mine in order to reboot the camera itself.
    * Rebooting the camera hardware may be able to be done from the Web interface of PoE switches.