== 2018/12/11 Commissioning meeting topics ==

 * Assignment of staffs for night work
  * [[https://teamup.com/kswnmta8p18h6u1uab]]

 * Readiness for the X arm commissioning.
  * [[https://docs.google.com/spreadsheets/d/1S2gyFkyajlbPXMKCrqJV7181YFHUxUgPRB6SXz4z4jI/edit?usp=sharing]]

----
=== Schedule ===
 * Every Wednesday morning: Maintenance; 12/12:updating RCG to 3.1.1 for RT models.
 * 11/5 - end of Nov.: Route to IYA is closed.
 * 12/10 or 11: ETMX cleaning
 * Week of 12/1, until 12/14:  Night work ok.
 * 12/15, 16 and Week of 12/17~:  No night work.

 * New schedule [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9310|Plan B]] is proposed. [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9311|Other list by Saito]].
  * Extended date: 12/10-1/6.
  * 1/6: End of X arm commissioning -> Open chambers.
  * Week of 1/7~: no beam in the daytime
  * 1/18~ : Y arm alignment from BS to ETMY using IR beam.
  * 2/18~ Y arm commissioning

----
=== Discussion ===

 * We learned we need to monitor VIS motion when pump down. We may need also some monitors VIS motion when venting.

----
 * X arm lock
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7128]]: PR area condition change w/o FFU operation
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7150]]: Switching off them all
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7180]]: Fiber fixing
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7203]]: Fiber fixing
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7224]]: Fiber fixing
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7239]]: X Arm lock!
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/uploads/7255_20181203043031_carmlock.pdf]]: Configuration of the PSL room
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7265]]: Frequency noise of the laser injected to MIF were evaluated by X arm
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7301]]: Cavity scan
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7307]]: X arm cavity characterization



 * Y arm alignment

 * VIS
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7162]]: BS recovery work
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7208]]: BS recovery work
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7236]]: SR3-RM was sitting on the EQ frame
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7244]]: SR3-RM was sitting on the EQ frame
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7268]]: SR3-RM was sitting on the EQ frame
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7296]]: 0.2-0.3Hz too noisy
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7299]]: 0.2-0.3Hz too noisy

 * Laser, PSL, IOO report
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7177]]: Intensity stabilization (laser power is 20 W)
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7220]]: iMC WFS work
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7275]]: iMC WFS loops closed


 * PCAL

 * PEM
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7251]]:SDF

 * DGS
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=7221]]:clean up of EY2 rack