Diff for "KAGRA/Subgroups/DET/DataQuality"

Differences between revisions 12 and 13

Online Data Quality Vector

Bit	Description	0	1	Comment
0	Odd Parity	-	-	This is not a data quality information. It is used for checking validation of DQV.
1	Lock flag	Unlocked	Locked	This bit checks K1:GRD-LSC_LOCK_STATE_N (When GRD channel shows 31415, Arm cavity is locked).
2	SDF flag	Not nominal	Nominal	This bit checks the setting of the IFO control is nominal or not (It may not work during IMC ER because someone will work on downstream of IMC).
3	Science mode	Not Science mode	Science mode	TY suppose Science mode flag is turned ON by manually after human check (It is automatically turned off when the lock is lost).
4	not used	-	-	(This bit will check OMC PD overflow for O3.)
5	MCE overflow	Overflow	No overflow	This bit checks MCE coil out overflow. (It will check ETMX for O3.)
6	not used	-	-	(This bit will check ETMY coil out overflow.)
7	NO Stoch injection	Injection	No injection	This bit checks the injection port of the k1calcs, k1calex, (and k1caley).
8	NO CBC injection	Injection	No injection	This bit checks the injection port of the k1calcs, k1calex, (and k1caley).
9	NO Burst injection	Injection	No injection	This bit checks the injection port of the k1calcs, k1calex, (and k1caley).
10	NO DET injection	Injection	No injection	This bit checks the injection port of the k1calcs, k1calex, (and k1caley).
11	NO CW injection	Injection	No injection	This bit checks the injection port of the k1calcs, k1calex, (and k1caley).
12	not assigned yet
13	not assigned yet
14	not assigned yet
15	not assigned yet

-  ⇤ ← Revision 12 as of 2019-06-06 23:32:07 → 
  Size: 3114
  Editor: TakahiroYamamoto
  Comment:
+   ← Revision 13 as of 2019-06-06 23:39:52 → ⇥
  Size: 3166
  Editor: TakahiroYamamoto
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 5:
+  * Data type: Unsigned 32bit integer (FR_VECT_4U)
-Line 11:
+Line 12:
-|| 4   || not used           || Overflow         || No overflow  || (This bit will check OMC PD overflow for O3.) ||
+|| 4   || not used           || -                || -            || (This bit will check OMC PD overflow for O3.) ||
-Line 13:
+Line 14:
-|| 6   || not used           || Overflow         || No overflow  || (This bit will check ETMY coil out overflow.) ||
+|| 6   || not used           || -                || -            || (This bit will check ETMY coil out overflow.) ||