= daqd log ==

startup file interpreter thread tid=140372980181264
calling yyparse(3, 4)
[Fri Jun  7 00:45:06 2013] ->3: #set avoid_reconnect
[Fri Jun  7 00:45:06 2013] ->3: set thread_stack_size=102400
[Fri Jun  7 00:45:06 2013] new threads will be created with the stack of size 102400K
[Fri Jun  7 00:45:06 2013] ->3: set allow_tpman_connect_fail
[Fri Jun  7 00:45:06 2013] ->3: #set dcu_status_check=5
[Fri Jun  7 00:45:06 2013] ->3: #set symm_gps_offset=-1
[Fri Jun  7 00:45:06 2013] ->3: #set symm_gps_offset=31535998
[Fri Jun  7 00:45:06 2013] ->3: set symm_gps_offset=347155213
[Fri Jun  7 00:45:06 2013] ->3: set debug=0
[Fri Jun  7 00:45:06 2013] ->3: set log=2
[Fri Jun  7 00:45:06 2013] ->3: set zero_bad_data=0
[Fri Jun  7 00:45:06 2013] ->3: set dcu_status_check=9
[Fri Jun  7 00:45:06 2013] ->3: set controller_dcu=22
[Fri Jun  7 00:45:06 2013] ->3: set controller_dcu=88
[Fri Jun  7 00:45:06 2013] ->3: set master_config="/opt/rtcds/kamioka/k1/target/fb/master"
[Fri Jun  7 00:45:06 2013] finished configuring data channels
[Fri Jun  7 00:45:06 2013] ->3: configure channels begin end
[Fri Jun  7 00:45:06 2013] ->3: tpconfig "/opt/rtcds/kamioka/k1/target/gds/param/testpoint.par"
[Fri Jun  7 00:45:06 2013] ->3: set gps_leaps = 820108813
[Fri Jun  7 00:45:06 2013] ->3: set detector_name="KAMIOKA"
[Fri Jun  7 00:45:06 2013] ->3: set detector_prefix="K1"
[Fri Jun  7 00:45:06 2013] ->3: set detector_longitude=-90.7742403889
[Fri Jun  7 00:45:06 2013] ->3: set detector_latitude=30.5628943337
[Fri Jun  7 00:45:06 2013] ->3: set detector_elevation=.0
[Fri Jun  7 00:45:06 2013] ->3: set detector_azimuths=1.1,4.7123889804
[Fri Jun  7 00:45:06 2013] ->3: set detector_altitudes=1.0,2.0
[Fri Jun  7 00:45:06 2013] ->3: set detector_midpoints=2000.0, 2000.0
[Fri Jun  7 00:45:06 2013] ->3: set num_dirs = 10
[Fri Jun  7 00:45:06 2013] ->3: set frames_per_dir=225
[Fri Jun  7 00:45:06 2013] ->3: set full_frames_per_file=1
[Fri Jun  7 00:45:06 2013] ->3: set full_frames_blocks_per_frame=16
[Fri Jun  7 00:45:06 2013] ->3: set frame_dir="/frames/full", "K-R-", ".gwf"
[Fri Jun  7 00:45:06 2013] ->3: set trend_num_dirs=10
[Fri Jun  7 00:45:06 2013] ->3: set trend_frames_per_dir=1440
[Fri Jun  7 00:45:06 2013] ->3: set trend_frame_dir= "/frames/trend/second", "K-T-", ".gwf"
[Fri Jun  7 00:45:06 2013] ->3: set raw-minute-trend-dir="/frames/trend/minute_raw"
[Fri Jun  7 00:45:06 2013] ->3: set nds-jobs-dir="/opt/rtcds/kamioka/k1/target/fb"
[Fri Jun  7 00:45:06 2013] ->3: set minute-trend-num-dirs=10
[Fri Jun  7 00:45:06 2013] ->3: set minute-trend-frames-per-dir=24
[Fri Jun  7 00:45:06 2013] ->3: set minute-trend-frame-dir="/frames/trend/minute", "K-M-", ".gwf"
[Fri Jun  7 00:45:06 2013] ->3: start main 10
[Fri Jun  7 00:45:06 2013] main started
[Fri Jun  7 00:45:06 2013] ->3: start profiler
[Fri Jun  7 00:45:06 2013] ->3: # comment out this block to stop saving data
[Fri Jun  7 00:45:06 2013] ->3: #
[Fri Jun  7 00:45:06 2013] frame saver started
[Fri Jun  7 00:45:06 2013] ->3: start frame-saver
[Fri Jun  7 00:45:07 2013] ->3: sync frame-saver
[Fri Jun  7 00:45:07 2013] ->3: start trender
[Fri Jun  7 00:45:07 2013] trender started
[Fri Jun  7 00:45:07 2013] trend frame saver started
[Fri Jun  7 00:45:07 2013] ->3: start trend-frame-saver
[Fri Jun  7 00:45:08 2013] ->3: sync trend-frame-saver
[Fri Jun  7 00:45:08 2013] minute trend frame saver started
[Fri Jun  7 00:45:08 2013] ->3: start minute-trend-frame-saver
[Fri Jun  7 00:45:08 2013] Done creating ADC structures
[Fri Jun  7 00:45:09 2013] ->3: sync minute-trend-frame-saver
[Fri Jun  7 00:45:09 2013] raw minute trend frame saver started
[Fri Jun  7 00:45:09 2013] ->3: start raw_minute_trend_saver
[Fri Jun  7 00:45:09 2013] ->3: #start frame-writer "225.225.225.1" broadcast="131.215.113.0" all
[Fri Jun  7 00:45:09 2013] ->3: #sleep 5
[Fri Jun  7 00:45:09 2013] producer started
[Fri Jun  7 00:45:09 2013] ->3: start producer
[Fri Jun  7 00:45:09 2013] ->3: start epics dcu
[Fri Jun  7 00:45:09 2013] edcu started
[Fri Jun  7 00:45:09 2013] ->3: start epics server "K0:DAQ-FB0_" "K1:DAQ-FB0_"
[Fri Jun  7 00:45:09 2013] epics server started
[Fri Jun  7 00:45:09 2013] ->3: start listener 8087
[Fri Jun  7 00:45:09 2013] Opened k1x01_daq

[Fri Jun  7 00:45:09 2013] Opened k1vex_daq

[Fri Jun  7 00:45:09 2013] ->3: start listener 8088 1
[Fri Jun  7 00:45:09 2013] Opened shared memory ipc area

[Fri Jun  7 00:45:09 2013] ->3: sleep 60
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 36025,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
[Fri Jun  7 00:45:09 2013] Epics server started
[Fri Jun  7 00:45:09 2013] EDCU has 2012 channels configured; first=0

[Fri Jun  7 00:45:10 2013] Waiting for DCU 88 to show Up
[Fri Jun  7 00:45:10 2013] Detected controller DCU 88

[Fri Jun  7 00:45:11 2013] Minute trender made GPS time correction; gps=1054626324; gps%60=24

KAGRA/Subgroups/DGS/Manual/CheckList/daqdLog (last edited 2013-06-07 17:04:54 by OsamuMiyakawa)