Differences between revisions 1 and 9 (spanning 8 versions)

Simulation Meeting

Participants

Kokeyama, Haoyu, Koyama, Hirose, Yuzu, Park, Izumi

IFO modeling
- Analytic caliculation vs finesse model (FPMI) technical note
- Analytic caliculation vs finesse model (PRFPMI) technical note
  1. try "fsig"
  2. when comparing with measurement, and use "fig" be careful of the frequency
  3. use python 3 updated on git
Birefringence modeling
1. to test: the coupled cavity analytic model
2. to setup two-world model (somiya model using BS to separate S-P) and check the fields
OMC modeling
1. Checking OMC parameters, testing finesse
2. setting up Optickle
Simulation interface
1. Yuzu-san gave a lecture to setup Debian on windows machines.
2. Next step: install python, finesse, gui libraries
3. let's setup the next lecture Second lecture after this meeting

KAGRA/Subgroups/MIF/Simulation/SimMeeting20200805 (last edited 2020-08-05 17:15:08 by KeikoKokeyama)

-  ⇤ ← Revision 1 as of 2020-08-03 12:58:57 → 
  Size: 149
  Editor: KeikoKokeyama
  Comment:
+   ← Revision 9 as of 2020-08-05 17:15:08 → ⇥
  Size: 1069
  Editor: KeikoKokeyama
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
+Kokeyama, Haoyu, Koyama, Hirose, Yuzu, Park, Izumi
-Line 7:
+Line 8:
+  * Analytic caliculation vs finesse model (FPMI) [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11857|technical note]]
  * Analytic caliculation vs finesse model (PRFPMI) [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=11858|technical note]]
     1. try "fsig"
     1. when comparing with measurement, and use "fig" be careful of the frequency
     1. --(use python 3)-- updated on git
-Line 8:
+Line 14:
+. to test: the coupled cavity analytic model
   1. to setup two-world model (somiya model using BS to separate S-P) and check the fields
-Line 9:
+Line 17:
+. Checking OMC parameters, testing finesse
   1. setting up Optickle
-Line 10:
+Line 20:
+. Yuzu-san gave a lecture to setup Debian on windows machines.
   1. Next step: install python, finesse, gui libraries
   1. --(let's setup the next lecture)-- Second lecture after this meeting