= KAGRA VIS Operations Manual - Drawings List =

This page collects information on part drawings for the suspensions. So far only the Type B payload is covered.

 * Assembly names are '''bold'''. "*" characters show levels in the hierarchy.
 * Quantities are per enclosing assembly.

||'''Assembly'''/Part Name (Inventor)||Qty||Part Name (PDF)||Folder (on \\Rm214\f\)||File||Description||Notes||
|| || || || || || || ||
||'''payload_general_assembly'''||1|| || || || || ||
|| || || || || || || ||
||*'''test_mass_assembly'''||1|| || || || || ||
||**Part-2-mirror||1|| || || || || ||
||**Part-1-cilinder_recoil_mass||1|| || || 10302-Gr.13-cilinder recoil mass.pdf || || ||
||**Part-3-back recoil mass||1||426|| ||10303-Gr.13-flange recoil mass.pdf|| || ||
||**Part-4.1-large front recoil mass||1|| || || 10305-Gr.13-large front recoil mass.pdf || || ||
||**Part-19-damper_new||1|| || || || || ||
||**Part-22-support_cables_on_mirror_new||1|| || || || || ||
||**'''osem_assembly'''||4|| || || || || ||
||(treat as black box for now)|| || || || || || ||
|| || || || || || || ||
||**'''Assembly_front_ball_screw_recycler'''||4|| || || || || ||
||***Part-25-Front screw recoil mirror with ball||1|| || || || || ||
||***Part-18-sphere||1|| || || || || ||
|| || || || || || || ||
||**'''Assembly_extra_long_screw_ball'''||4|| || || || || ||
||***Part-26-extra long screw recycler||1|| || || || || ||
||***Part-18-sphere||1|| || || || || ||
|| || || || || || || ||
||**'''Assembly_screw_ball_recycler'''||4|| || || || || ||
||***Part-12-Screw with ball||1|| || || || || ||
||***Part-18-sphere||1|| || || || || ||
|| || || || || || || ||
||**wire_breaker_RM||2|| || || || || ||
||**'''wire_pairs_TM_assembly'''||2|| || || || || ||
|| || || || || || || ||
||**Part-27-counterweight_thick||4|| || || || || ||
||**clamp_wire_breaker_RM||2|| || || || || ||
||**wire_breaker_prism||1|| || || || || ||
||**wire_breaker_secondary_metal||2|| || || || || ||
||**wire_extension||4|| || || || || ||
|| || || || || || || ||
||*'''intermediate_assembly'''||1|| || || || || ||
||**intermediate_mass_new||1|| || || || || ||
||***B-Part-50-base internal box||1|| || || || || ||
||***B-Part-51-mass regulation centre of gravity||1|| || || || || ||
||***B-Part-51bis-mass regulation centre of gravity||1|| || || || || ||
||***Picomotor 8032-UHV||2|| || || || || ||
||***'''Molla di compressione'''||2|| || || || || ||
||***Molla di compressione1||1|| || || || || ||
||***Part-20-security fixing||4|| || || || || ||
||***B-Part-62-cap||1|| || || || || ||
||***'''Assembly flag intermediate mass'''||6|| || || || || ||
||***B-Part-64-base magnet||1|| || || || || ||
||***B-Part-71-magnet||1|| || || || || ||
||***B-Part65-flag||1|| || || || || ||
|| || || || || || || ||
||***Part-23-spacer spring||2|| || || || || ||
||***Part-32-nut magnet's plate||1|| || || || || ||
||***Part-35-cone||1|| || || || || ||
||***Part-33-nut for connection wire||1|| || || || || ||
||***Part10028-wire-intermediate-bottom filter||1|| || || || || ||
||***mass_compensation_top_cavity||2|| || || || || ||
||***mass_compensation_bottom_cavity||2|| || || || || ||
||***support_upper_mass||4|| || || || || ||
||***B-Part-54-support picomotor_new||2|| || || || || ||
||***C-Part-85-small support cables-25_new||2|| || || || || ||
||***B-Part-53-side_2_internal_box_new||1|| || || || || ||
||***Clamp_on_IM||4|| || || || || ||
||***B-Part-53bis-side_2_internal_box_new||1|| || || || || ||
||***alignment_slab||2|| || || || || ||
||***'''clamp_assembly_new'||2|| || || || || ||
||****clamp_01_408_new||1|| || || || || ||
||****clamp_05_411_new||1|| || || || || ||
||****clamp_02_412_new||1|| || || || || ||
||****clamp_04_409_new||1|| || || || || ||
||****clamp_03_410_new||1|| || || || || ||
|| || || || || || || ||
||***B-Part-52-side_1_internal_box_new||1|| || || || || ||
||*** B-Part-52bis-side_1_internal_box_new ||1|| || || || || ||
||***B-Part-34-connection_main_wire||1|| || || || || ||
||***'''lock_internal_mass_assembly'''||4|| || || || || ||
||****B-Part-82-locking internal mass||1|| || || || || ||
|| || || || || || || ||
||***'''wires_pair_RM_assembly'''||2|| || || || || ||
||***Part-10-wire_MIR4_MIR||2|||| || || || ||
|| || || || || || || ||
||***Part-10001-nuovo clamp of security bar||2|| || || || || ||
||***Part-10002-security-bar||2|| || || || || ||
|| || || || || || || ||
||**'''C-Assembly external box_new'''||1|| || || || || ||
||***C-Part-73-lateral1_new||4|| || || || || ||
||***'''osem_new_with_individual_holder_IRM_lateral'''||3|| || || || || ||
||****osem_individual_holder_IRM||1|| || || || || ||
||****'''osem_assembly'''||1|| || || || || ||
||(treat as black box for now)|| || || || || || ||
|| || || || || || || |||| || || || || || || ||
||***C-Part-76-cover_external_box_new||1|| || || || || ||
||***C-Part-88-support spider||3|| || || || || ||
||***'''blind_plate_side_assembly'''||4|| || || || || ||
||****blind_plate_side||1|| || || || || ||
|| || || || || || || ||
||***'''osem_new_with_individual_holder_IRM_top'''||3|| || || || || ||
||****osem_individual_holder_IRM_top||1|| || || || || ||
||'''osem_assembly'''||1|| || || || || ||
||(treat as black box for now)|| || || || || || ||
|| || || || || || || ||
||***C-Part-89-hexagonal spider_new||1|| || || || || ||
||***Part-10029-wire bottom filter-recoil mass||3|| || || || || ||
||***Part-10035-fastening suspesion wire||3|| || || || || ||
|| || || || || || || ||
||*security_frame_assembly||1|| || || || || ||
||**Part-10004-safety_structure_disk_2_new||1|| || || || || ||
||**Part-10022-security_intermediate_mass_new||2|| || || || || ||
||**Part-10007-rod security structure 526||4|| || || || || ||
||**IRM_extension_inner_part||4|| || || || || ||
||**IRM_extension_outer_part||4|| || || || || ||
||**OSEM_holder_support_aid||1|| || || || || ||
||**OSEM_holder_support_aid_2||1|| || || || || ||
||**Part-10009-rod security structure 650||3|| || || || || ||
||**Part-10008-safety structure disk 3|||| || || || || ||
||**Part-10025-lateral security locking||4|| || || || || ||
||**Part-10023-clamp intermediate mass||4|| || || || || ||
||**'''security_frame_for_RM_assembly'''||2|| || || || || ||
||***Part-10021-lateral locking recoil mass||2|| || || || || ||
||***Part-10020-plate locking recoil mass||1|| || || || || ||
|| || || || || || || ||
||**Part-10010-safety stucture disk double||1|| || || || || ||
||**Part-10006-rod security structure 515||3|| || || || || ||
||**Part-10005-rod security structure 602||3|| || || || || ||
|| || || || || || || ||
|| || || || || || || ||
|| ||1||404||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||01_updated_drawings.pdf||SS hollow M12 bolt?|| ||
|| ||1||380||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||02_updated_drawings.pdf||AL adapter block?|| ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||03_updated_drawings.pdf||IM Assembly|| ||
|| ||1||418||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||04_updated_drawings.pdf||SS Hex ring|| ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||05_updated_drawings.pdf||Support for the COM regulation body || ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||06_updated_drawings.pdf|| IRM Safety Frame Inner Part || ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||07_updated_drawings.pdf|| Bottom cavity compensation mass || ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||08_updated_drawings.pdf||Top cavity still compensation mass|| ||
|| ||1||427||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||09_updated_drawings.pdf||AL hollow cube?|| ||
|| ||1||360||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||10_updated_drawings.pdf||AL strut?|| ||
|| ||1||433\434||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||11_updated_drawings.pdf||SS wire standoff|| ||
|| ||1||403||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\updated_drawings_payload||12_updated_drawings_requires_update.pdf||OSEM flag||"needs update"||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10300-Gr.13-Assembly B1A mirror-recoil mass.pdf||Mirror\recoil mass assembly||superseded?||
|| ||1||424||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10302-Gr.13-cilinder recoil mass.pdf||Recoil mass cylinder|| ||
|| ||1||(427)||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10303-Gr.13-flange recoil mass.pdf||Recoil mass flange||"superseded"||
|| ||1||(433\434)||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10304-Gr.13-Varia details.pdf|| || ||
|| ||1||438\440||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10305-Gr.13-large front recoil mass.pdf||Recoil mass thick flange and small part || ||
|| ||1||513||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10306-Gr.13-Save mirror.pdf||Mirror Shield|| ||
|| ||1||514\515||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10307-Gr.13-small mirror.pdf||Small mirror holder|| ||
|| ||1||->||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10308-Gr.13-Damper mirror.pdf||Mirror damper assembly 404+632+633+634+635 etc|| ||
|| ||1|| 632\633\634\635 ||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\original_drawings_Gr.13||10309-Gr.13-Damper mirror.pdf||Mirror damper parts|| ||
|| ||1||motor_support_rod_SF||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\Fishing_rod|| motor_support_rod_SF.pdf || motor_support_rod_SF.pdf || ||
|| ||1||motor_support_rod||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\Fishing_rod|| motor_support_rod.pdf || || ||
|| ||1||part-100new-main filter platform||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\Fishing_rod|| part-100new-main filter platform.pdf || || ||
|| ||1||part-101new-blade central support||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\Fishing_rod|| part-101new-blade central support.pdf || || ||
|| ||1||Part31new-part_plate_motor-1||VIS\CAD\TypeB\!WorkSpace\Frame with B-1\!NewDrawings\Fishing_rod|| Part31new-part_plate_motor-1.pdf || || ||