3205
Comment:
|
3744
|
Deletions are marked like this. | Additions are marked like this. |
Line 59: | Line 59: |
=== Actively used drivers === | === Currently used drivers === ==== Type-A ==== ||Suspension||Rack||S-Number||Note|| ||ETMX ||||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=????|S140????]]|||| ==== Type-B ==== ||Suspension||Rack||S-Number||Note|| ||BS ||||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=????|S140????]]|||| ==== Type-Bp ==== |
Line 65: | Line 73: |
||Electric shop||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7792|S1407792]]||To be used for ???|| | ||Electric shop||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7792|S1407792]]||To be used for ???. OSC circuit is no installed|| === Broken === ||Location||S-Number||Note|| ||Electric shop||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7786|S1407786]]|||| |
KAGRA VIS Operations Manual - LVDT
LVDTs are used for vertical sensing and actuation in all the GAS filters and for horizontal sensing and actuation in all the IP stages.
See LVDT Signal Conditioning for useful background on LVDT demodulation.
See JGW-T1201255 for description of the Nikhef-supplied cards, and JGW-T1604798 for more information on how to tune the demodulation circuit.
LVDT Calibration Procedure: JGW-E1707287 or LVDT Calibration Procedure.
LVDT Coil and Driver Data
Test Mass Suspensions |
|
BS and SR suspensions |
|
PR Suspensions |
|
Modecleaner Suspensions |
Yoke Height Settings
The yoke should be set so that the double and single LVDT coils are symmetrically aligned when the keystone is at nominal height. It is convenient to set this in terms of the amount the PEEK coil former sticks out above the filter baseplate.
Bottom Filter (BS and SRx)
Note that the CAD is wrong for the bottom filter yoke:
Standard Filter (BS and SRx)
Top Filter (BS and SRx)
Summary
GAS Filter |
Yoke Height |
Keystone Height |
BS BF |
3.5 mm |
65.5 mm (up from baseplate) |
SR BF |
3.5 mm |
65.5 mm (up from baseplate) |
BS SF |
6 mm |
65.5 mm (up from baseplate) |
SR SF |
6 mm |
65.5 mm (up from baseplate) |
BS F0 |
36 mm |
153 mm (up from top plate), 16.5 mm (down from ring) |
SR F0 |
34 mm |
151 mm (up from top plate), 16.5 mm (down from ring) |
Type Bp Data
Your data here!
Stocktake
Old: LVDT Stocktake as of 2018-04-13
List of LVDT Driver Boxes
LVDT Driver Module Top Assembly
Currently used drivers
Type-A
Suspension |
Rack |
S-Number |
Note |
ETMX |
Type-B
Suspension |
Rack |
S-Number |
Note |
BS |
Type-Bp
Suspension |
Rack |
S-Number |
Note |
PR2 |
PR2 |
For GAS filters ? |
Drivers in stock
Location |
S-Number |
Note |
Electric shop |
To be used for ???. OSC circuit is no installed |
Broken
Location |
S-Number |
Note |
Electric shop |