Automatic Target System

Related subgroups: VAC, MIF(initial Alignment, Instrument Control), DGS

..Up

Contents

  1. Automatic Target System
    1. Scope
    2. Applicable Documents
    3. General Description
      1. Functions
      2. Naming Conventions
      3. Locations
    4. Requirements
    5. Characteristics
    6. Inspection plans
    7. Procurement process and plans
    8. Links

Scope

The scope of Automatic Target System is to provide targets on the way of a beam line, and to be used for the alignment of the beam line in the interferometer. This system helps commissioning phase, and will be turned off during the observation mode.

For example, both arm cavity should have this system; each target is located on the way of a 3km arm tube, and have an accessible human interface for interferometer operators to easily turn on/off from the center room.

Applicable Documents

General Description

This kind of system has been already developed and practically used in TAMA300. Each unit of target system consists of a target circle with a center hole, and an liner feed-through.

In the arm cavity, each target will be attached

Functions

TBD

Naming Conventions

TBD

Locations

Requirements

TBD

Characteristics

TBD

Inspection plans

TBD

Procurement process and plans

TBD