694
Comment:
|
1527
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
## page was renamed from digital | |
Line 3: | Line 2: |
=== CLIOデジタル化に必要なものの概要 === *SUN Fire X4600;4(or 8) processors, RAID HDD *CentOS, Real Time Core, Matlab *Expansion chassis *ADC *DAC *I/O binary *General linux for operation and monitor *CDS software (RTFE, DAQS, EPICS, AWG, DTT, foton, dataviewer, striptool, ezca, tds, burt, conlog) |
|
Line 4: | Line 12: |
*P-arm signal 置き換え *Whitening *Dewhitening *Anti aliasing *Anti imaging |
Related Analog circuits Timing system Whitening, dewhitening, anti aliasing, anti imaging filters |
Line 10: | Line 16: |
*long term measurement *channel number *power *laser temp. *temperature *humidity *dust *power increaign script *alignment script |
=== 目的 === CLIOでのDigital制御システムの導入の目的は *視覚的に分かりやすいヒューマンインターフェースの提供 *よりスムーズなロックアクイジションの提供 *デジタル制御フィルターによる制御デザインのしやすさ *スクリプト化、速いスイッチング等による、複雑な制御の切り替え時におけるヒューマンエラーの軽減 *レーザーパワー、温度等、長期間モニタの提供 などであるが、これは将来計画であるLCGTでのデジタル導入のためのテストベンチも兼ねている。導入にあたり、以下に示すような段階的なステップを踏むことになる。 |
Line 20: | Line 25: |
*Pitch cnetering script *WFS for Arm cavity *WFS QPD *noise budget *shotnoise *frequency noise *amplitude noise *seismic noise *angle noise *suspension thermal noise *mirror thermal noise *oscillator phase noise *oscillator amplitude noise |
*[[CLIO/digital/FirstStage|第一段階: Replacement of length signals]] *[[CLIO/digital/LockedFP|第二段階: Full digital CLIO]] *[[CLIO/digital/RSE|(参考)CLIO RSE]] |
Line 34: | Line 29: |
*Digital phase shifter *I&Q demod *手動スイッチをTTLの信号に置き換える |
また、以下のようなスクリプトもしくはアプリケーションを組む予定である *[[CLIO/digital/scripts|script list]] |
Digital control plan
CLIOデジタル化に必要なものの概要
- SUN Fire X4600;4(or 8) processors, RAID HDD
- CentOS, Real Time Core, Matlab
- Expansion chassis
- ADC
- DAC
- I/O binary
- General linux for operation and monitor
- CDS software (RTFE, DAQS, EPICS, AWG, DTT, foton, dataviewer, striptool, ezca, tds, burt, conlog)
Related Analog circuits Timing system Whitening, dewhitening, anti aliasing, anti imaging filters
目的
CLIOでのDigital制御システムの導入の目的は
- 視覚的に分かりやすいヒューマンインターフェースの提供
- よりスムーズなロックアクイジションの提供
- デジタル制御フィルターによる制御デザインのしやすさ
- スクリプト化、速いスイッチング等による、複雑な制御の切り替え時におけるヒューマンエラーの軽減
- レーザーパワー、温度等、長期間モニタの提供
などであるが、これは将来計画であるLCGTでのデジタル導入のためのテストベンチも兼ねている。導入にあたり、以下に示すような段階的なステップを踏むことになる。
また、以下のようなスクリプトもしくはアプリケーションを組む予定である