|
Size: 179
Comment:
|
Size: 2561
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 5: | Line 5: |
| * MICH LOCK flag * K1:GRD-LSC_LOCK_STATE_N (16Hz sampling) * 1000 is operation mode |
|
| Line 6: | Line 10: |
| * K1:CAL-CS_CALHWI_CW_INJ_SW (on:1 off:0) | * (1) K1:CAL-CS_CALHWI_CW_INJ_SW (16Hz sampling, on:1 off:0) * Hardware injection switch of CW injection (used in injection flag) * (2) K1:CAL-CS_CALHWI_HWINJ_SW (16Hz sampling, on:1 off:0) * Hardware injection master switch (used in injection flag) * (3) K1:CAL-CS_CALHWI_(X/Y/BS)_GAIN (16Hz sampling) * Signal gain to X, Y, BS * Injection signal * (4) K1:CAL-CS_CAL_HWI_HARDWARE_DQ (16kHz sampling) * Total amplitude of Hardware injection(CBC+CW+TEST) * So, total amplitude of CW injection is * (1)*(2)*(3)*(4) [count] * But, we should apply transfer function between injection port and displacement of each test mass when evaluating the TM displacement * time delay between cal model and BS model (~61usec) * digital anti-imaging filter * time delay in the BS IOP(shared memory for DAC output) (~61usec) * time delay in the DAC output (There is unknown issue) (~60usec???) * The detail is summarized in ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=6924 | JGWDoc6924]]) * analog anti-imaging filter * Coil driver(The transfer function is still investigated, with connection of coil) * Force to length transfer function(1/f^2 for higher frequency) * Actuator efficiency (Large measurement uncertainties due to fluctuation of optical gain) * Injection method * k1script:/users/yokozawa/inj_phase1/inj_dat.sh * k1script:/users/yokozawa/inj_phase1/inj_dat2.sh * Prepare the dat files before injection, scp from other PC, using awgstream we injected signal. * Injection waveforms * 15 LIGO injection pulsars([[https://losc.ligo.org/s/injections/o1/cw_injections.html|LIGO O1 CWINJ]]) * using lalapps_Makefakedta_v5 * 6 continuous sine * Lists of continuous injection ||Pulsar Name||alpha||delta ||cosi||freq||f1dot||psi||phi0||h0[count]||h0[strain]||time shift[sample]|| ||P0||1.248816734||-0.981180225||0.794905||265.5771052||-4.15E-12||0.770087086||2.66||94.772316||0||-5|| ||P1||0.652645832||-0.514042406||0.4638224||849.0832962||-3.00E-10||0.35603553||1.28||100.0||0||-5|| ||P2||3.75692884||0.060108958||-0.928576||575.163573||-1.37E-13||-0.221788475||4.03||100.0||0||-5|| ||P3||3.113188712||-0.583578803||0.0||108.8571594||-1.46E-17||0.444280306||5.53||23.460442||0||-5|| ||P4|| |
Summary of Continuous Wave Injection at bKAGRA phase1 operation
- Worker : T.Yokozawa, A.Miyamoto, T.Sawada
- MICH LOCK flag
- K1:GRD-LSC_LOCK_STATE_N (16Hz sampling)
- 1000 is operation mode
- K1:GRD-LSC_LOCK_STATE_N (16Hz sampling)
- Injection flag
- (1) K1:CAL-CS_CALHWI_CW_INJ_SW (16Hz sampling, on:1 off:0)
- Hardware injection switch of CW injection (used in injection flag)
- (2) K1:CAL-CS_CALHWI_HWINJ_SW (16Hz sampling, on:1 off:0)
- Hardware injection master switch (used in injection flag)
- (3) K1:CAL-CS_CALHWI_(X/Y/BS)_GAIN (16Hz sampling)
- Signal gain to X, Y, BS
- (1) K1:CAL-CS_CALHWI_CW_INJ_SW (16Hz sampling, on:1 off:0)
- Injection signal
- (4) K1:CAL-CS_CAL_HWI_HARDWARE_DQ (16kHz sampling)
- Total amplitude of Hardware injection(CBC+CW+TEST)
- So, total amplitude of CW injection is
- (1)*(2)*(3)*(4) [count]
- But, we should apply transfer function between injection port and displacement of each test mass when evaluating the TM displacement
- time delay between cal model and BS model (~61usec)
- digital anti-imaging filter
- time delay in the BS IOP(shared memory for DAC output) (~61usec)
- time delay in the DAC output (There is unknown issue) (~60usec???)
The detail is summarized in (JGWDoc6924)
- analog anti-imaging filter
- Coil driver(The transfer function is still investigated, with connection of coil)
- Force to length transfer function(1/f^2 for higher frequency)
- Actuator efficiency (Large measurement uncertainties due to fluctuation of optical gain)
- Injection method
- k1script:/users/yokozawa/inj_phase1/inj_dat.sh
- k1script:/users/yokozawa/inj_phase1/inj_dat2.sh
- Prepare the dat files before injection, scp from other PC, using awgstream we injected signal.
- Injection waveforms
15 LIGO injection pulsars(LIGO O1 CWINJ)
- using lalapps_Makefakedta_v5
- 6 continuous sine
- Lists of continuous injection
Pulsar Name |
alpha |
delta |
cosi |
freq |
f1dot |
psi |
phi0 |
h0[count] |
h0[strain] |
time shift[sample] |
P0 |
1.248816734 |
-0.981180225 |
0.794905 |
265.5771052 |
-4.15E-12 |
0.770087086 |
2.66 |
94.772316 |
0 |
-5 |
P1 |
0.652645832 |
-0.514042406 |
0.4638224 |
849.0832962 |
-3.00E-10 |
0.35603553 |
1.28 |
100.0 |
0 |
-5 |
P2 |
3.75692884 |
0.060108958 |
-0.928576 |
575.163573 |
-1.37E-13 |
-0.221788475 |
4.03 |
100.0 |
0 |
-5 |
P3 |
3.113188712 |
-0.583578803 |
0.0 |
108.8571594 |
-1.46E-17 |
0.444280306 |
5.53 |
23.460442 |
0 |
-5 |
P4 |