Size: 1200
Comment:
|
Size: 2295
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 28: | Line 28: |
* The detail is summarized in | * The detail is summarized in ([[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=6924 | JGWDoc6924]]) * analog anti-imaging filter * Coil driver(The transfer function is still investigated, with connection of coil) * Force to length transfer function(1/f^2 for higher frequency) * Actuator efficiency (Large measurement uncertainties due to fluctuation of optical gain) * Injection method * k1script:/users/yokozawa/inj_phase1/inj_dat.sh * k1script:/users/yokozawa/inj_phase1/inj_dat2.sh * Prepare the dat files before injection, scp from other PC, using awgstream we injected signal. * Injection waveforms * 15 LIGO injection pulsars([[https://losc.ligo.org/s/injections/o1/cw_injections.html|LIGO O1 CWINJ]]) * using lalapps_Makefakedta_v5 * 6 continuous sine * Lists of continuous injection || Pulsar Name || alpha || delta || cosi || freq || f1dot || psi || phi0 || h0[count] || h0[strain] || time shift[count] || || P0 || 1.248816734 || -0.981180225 || 0.794905 || 265.5771052 || -4.15E-12 || 0.770087086 || 2.66 || 94.772316 || 0 || -5 || |
Summary of Continuous Wave Injection at bKAGRA phase1 operation
- Worker : T.Yokozawa, A.Miyamoto, T.Sawada
- MICH LOCK flag
- K1:GRD-LSC_LOCK_STATE_N (16Hz sampling)
- 1000 is operation mode
- K1:GRD-LSC_LOCK_STATE_N (16Hz sampling)
- Injection flag
- (1) K1:CAL-CS_CALHWI_CW_INJ_SW (16Hz sampling, on:1 off:0)
- Hardware injection switch of CW injection (used in injection flag)
- (2) K1:CAL-CS_CALHWI_HWINJ_SW (16Hz sampling, on:1 off:0)
- Hardware injection master switch (used in injection flag)
- (3) K1:CAL-CS_CALHWI_(X/Y/BS)_GAIN (16Hz sampling)
- Signal gain to X, Y, BS
- (1) K1:CAL-CS_CALHWI_CW_INJ_SW (16Hz sampling, on:1 off:0)
- Injection signal
- (4) K1:CAL-CS_CAL_HWI_HARDWARE_DQ (16kHz sampling)
- Total amplitude of Hardware injection(CBC+CW+TEST)
- So, total amplitude of CW injection is
- (1)*(2)*(3)*(4) [count]
- But, we should apply transfer function between injection port and displacement of each test mass when evaluating the TM displacement
- time delay between cal model and BS model (~61usec)
- digital anti-imaging filter
- time delay in the BS IOP(shared memory for DAC output) (~61usec)
- time delay in the DAC output (There is unknown issue) (~60usec???)
The detail is summarized in (JGWDoc6924)
- analog anti-imaging filter
- Coil driver(The transfer function is still investigated, with connection of coil)
- Force to length transfer function(1/f^2 for higher frequency)
- Actuator efficiency (Large measurement uncertainties due to fluctuation of optical gain)
- Injection method
- k1script:/users/yokozawa/inj_phase1/inj_dat.sh
- k1script:/users/yokozawa/inj_phase1/inj_dat2.sh
- Prepare the dat files before injection, scp from other PC, using awgstream we injected signal.
- Injection waveforms
15 LIGO injection pulsars(LIGO O1 CWINJ)
- using lalapps_Makefakedta_v5
- 6 continuous sine
- Lists of continuous injection
Pulsar Name |
alpha |
delta |
cosi |
freq |
f1dot |
psi |
phi0 |
h0[count] |
h0[strain] |
time shift[count] |
|| P0 || 1.248816734 || -0.981180225 || 0.794905 || 265.5771052 || -4.15E-12 || 0.770087086 || 2.66 || 94.772316 || 0 || -5 ||