Summary of Phase 1 Measurements

• Summary of Phase 1 measurements for bKAGRA Phase 1 paper.

Basic configurations

• input power
• power at detection RF PD

  • Reflection from one end mirror 0.20 mW (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4876)

  • At dark fringe 56 +/- 10 uW (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4903)

• modulation frequency, modulation depth

  • 16.87293 MHz (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4831)

  • beta = 0.12 (from error signal amplitude), 0.2 (from RF power applied to EOM) (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4876 , http://klog.icrr.u-tokyo.ac.jp/osl/?r=4907)

• vacuum level
• suspension and coil driver configurations (difference between the final configuration)

Michelson initial alignment

• details of slit method

• Tcam and baffle PD performance (details-> Tcam paper)

  • time delay, resolution ...

Installation accuracy

• Schunupp asymmetry measurement
• IMC length measurement

  • 53.30299(2) m (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4831)

Cryogenics

• cooling curve (details -> CRY paper)

Suspension characterization

• length actuation efficiency measurements for BS, comparison with expectations (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4811)

• length actuation efficiency measurements for ETMX and Y, comparison with expectations
• TF difference between ETMX and ETMY (room temperature and cryogenic)
• vertical to length coupling, other coupling measurements

Sensitivity and stability

• actuation efficiency drift
• alignment drift of suspensions

• visibility and optical gain drift (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4775)

• sensitivity stability, duty factor, lock duration (similar plots in https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=5177)

• Noise budget (http://klog.icrr.u-tokyo.ac.jp/osl/?r=4834)

• magnetic and acoustic noise from PEM injection (details -> PEM paper?)

Seismic noise, arm length drift

• seismic spectra stability (similar plots in https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=2971)

• differential seismic noise measured by Michelson (3-km CMRR)
• differential arm length drift, correlation between GIF-X