= Minute of KAGRA commissioning meeting =
----

 * Date: 2018/6/26 11AM~12PM
 * Attendance: Miyakawa, Yokozawa, Stefan, Nakano, Yamamoto
  * eZuce: Shoda, Ushiba, Hirose, Eleonora, Izumi, Yamamoto(Toyama), Kokeyama, Miyoki
-----

== PMC ==
 * Summary of PMC work by Stefan during his stay at KAGRA
  * Two PZT steering mirrors were installed yesterday for input beam to IMC.
  * Calibration to Hz will be done today.
  * Thermal drive is sill missing.
  * Needs fitness, noise budget or something.
  * Probably we do not need to change HV PZT driver by O3, but needs estimation.
 
 * PMC servo modifications -> Stefan
   * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=5155]]

 * FSS and PMC locked together -> Nakano, Stefan
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=5318]]
 * PMC autolocking sped up -> Stefan, Nakano
  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=5320]]

== Others ==
 * Beam height brain storming -> next week?
  * ETMX and ITMX should be located at half low temperature stage and room temperature stage. It means that ~5mm off from the nominal position. Type A can compensate ~5mm.

 * --(Necessary number of High power coil driver -> Aso)--

 * Cable cleaning on BS rack will be done this weekend.



 
 * Next meeting: 7/3.