Differences between revisions 1 and 3 (spanning 2 versions)
⇤ ← Revision 1 as of 2018-11-20 12:39:22 →
Size: 1912
Editor: OsamuMiyakawa
Comment:
← Revision 3 as of 2018-11-26 15:31:32 → ⇥
Size: 2199
Editor: OsamuMiyakawa
Comment:
Deletions are marked like this. Additions are marked like this.
Line 23: Line 23:
 * Extension: 12/10-1/6.  * 11/26: Extended chief meeting require some explanation of current status.
 * Deadline of decision where postponement or not: at least after 11/26.
 * Possible extension date: 12/10-1/6.
Line 25: Line 27:
 * Week of 12/17~ : No night work.
 		  * Week of 12/17~: No night work.
 * End of X arm commissioning: 1/6. -> Open chambers
 * Week of 1/7~: no beam in the daytime
 * 2/18~ Y arm commissioning

2018/11/27 Commissioning meeting topics

Schedule

  • Every Wednesday morning: Maintenance
  • 11/5-end of Nov.: Route to IYA is closed.
  • Needs time sharing with MZ in the daytime until 11/26.
  • 11/23-25: Line injection
  • 11/26~12/9: Daytime: Y arm alignment from BS to ETMY using IR beam.
    • Members: Enomoto, Miyazaki, Yokogawa, Sugimoto
    • Beam alignment will actually start after the installation of EYA NAB. It will take several days.
    • Green from SR2 will be available after 12/9, so we need to align Y arm using IR only.
    • Needs help for Y arm alignment.
  • 12/10 or 11: ETMX cleaning
  • 11/26: Extended chief meeting require some explanation of current status.
  • Deadline of decision where postponement or not: at least after 11/26.
  • Possible extension date: 12/10-1/6.
  • Week of 12/10: Night work ok.
  • Week of 12/17~: No night work.

  • End of X arm commissioning: 1/6. -> Open chambers

  • Week of 1/7~: no beam in the daytime
  • 2/18~ Y arm commissioning

Discussion

  • We learned we need to monitor VIS motion when pump down. We may need also some monitors VIS motion when venting.
  • Needs re-scheduling for the X arm commissionig?

KAGRA/Commissioning/Weekly/20181127/Agenda (last edited 2018-11-27 11:58:53 by OsamuMiyakawa)