|
Size: 6179
Comment:
|
Size: 6248
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| Line 6: | Line 5: |
| ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-PSL_STATE_N||PMC guardian state. If this is 1000, PMC is locked.|| Same || Same || ||K1:PSL-PMC_TRANS_DC_OUT_DQ||PMC transmitted power. If this is ~6, PMC is locked.|| Same || Same || ||K1:PSL-PMC_MIXER_OUT_DQ||PMC error signal. || Same || Same || ||K1:PSL-PMC_FAST_MON_OUT_DQ||PMC feedback signal to PMC PZT. || Same || Same || ||K1:PSL-PMC_SLOW_MON_OUT_DQ||PMC feedback signal to laser temperature. || Same || Same || |
||Channel Name ||Mar 25 9:00 - Mar 31 17:00 ||Apr 11 9:00 - Apr 12 13:00 ||Apr 12 16:10 - || ||K1:GRD-PSL_STATE_N ||PMC guardian state. If this is 1000, PMC is locked. ||Same ||Same || ||K1:PSL-PMC_TRANS_DC_OUT_DQ ||PMC transmitted power. If this is ~6, PMC is locked. ||Same ||Same || ||K1:PSL-PMC_MIXER_OUT_DQ ||PMC error signal. ||Same ||Same || ||K1:PSL-PMC_FAST_MON_OUT_DQ ||PMC feedback signal to PMC PZT. ||Same ||Same || ||K1:PSL-PMC_SLOW_MON_OUT_DQ ||PMC feedback signal to laser temperature. ||Same ||Same || |
| Line 14: | Line 14: |
| ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-IMC_LOCK_STATE_N||IMC guardian state. If this is 1000, IMC is locked.|| Same|| Same || ||K1:IMC-MCL_TRANS_OUT_DQ||IMC transmitted power. If this is ~0.4, IMC is locked.|| Same || Same || ||K1:IMC-MCL_SERVO_OUT_DQ||IMC feedback signal to MCe. ||Same||Same, but MCi feedback was added on Apr 12 13:44 JST ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1507|klog #1507]]).|| ||K1:IMC-REFL_SERVO_FLTIN_OUT_DQ||IMC error signal.||Same||Same|| ||K1:IMC-REFL_SERVO_FLTFAST_OUT_DQ||IMC feedback signal to the laser PZT.||Same||The port for a laser PZT feed back signal have been changed to FLTSLOW channel.|| ||K1:IMC-REFL_SERVO_FLTSLOW_OUT_DQ||IMC feedback signal to the laser PZT.||Not used||Same|| ||K1:VIS-MCI_DITHERINF_Y_IN1_DQ||MCi dither asc error signal.||N/A||Same|| ||K1:VIS-MCI_DITHERINF_Y_IN1_DQ||MCi dither asc feedback signal to the MCi.||N/A||Same|| ||K1:VIS-MCE_DITHERINF_Y_IN1_DQ||MCe dither asc error signal.||N/A||Same|| ||K1:VIS-MCE_DITHERINF_Y_IN1_DQ||MCe dither asc feedback signal to the MCe.||N/A||Same|| |
||Channel Name ||Mar 25 9:00 - Mar 31 17:00 ||Apr 11 9:00 - Apr 12 13:00 ||Apr 12 16:10 - || ||K1:GRD-IMC_LOCK_STATE_N ||IMC guardian state. If this is 1000, IMC is locked. ||Same ||Same || ||K1:IMC-MCL_TRANS_OUT_DQ ||IMC transmitted power. If this is ~0.4, IMC is locked. ||Same ||Same || ||K1:IMC-MCL_SERVO_OUT_DQ ||IMC feedback signal to MCe. ||Same ||Same, but MCi feedback was added on Apr 12 13:44 JST ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1507|klog #1507]]). || ||K1:IMC-REFL_SERVO_FLTIN_OUT_DQ ||IMC error signal. ||Same ||Same || ||K1:IMC-REFL_SERVO_FLTFAST_OUT_DQ ||IMC feedback signal to the laser PZT. ||Same ||The port for a laser PZT feed back signal have been changed to FLTSLOW channel. || ||K1:IMC-REFL_SERVO_FLTSLOW_OUT_DQ ||Not used ||Not used ||IMC feedback signal to the laser PZT. || ||K1:VIS-MCI_DITHERINF_Y_IN1_DQ ||N/A ||MCi dither asc error signal. ||Same || ||K1:VIS-MCI_DITHERINF_Y_OUT_DQ ||N/A ||MCi dither asc feedback signal to the MCi. ||Same || ||K1:VIS-MCE_DITHERINF_Y_IN1_DQ ||N/A ||MCe dither asc error signal. ||Same || ||K1:VIS-MCE_DITHERINF_Y_OUT_DQ ||N/A ||MCe dither asc feedback signal to the MCe. ||Same || |
| Line 26: | Line 28: |
| ||Channel Name ||Mar 25 9:00 - Mar 31 17:00 ||Apr 11 9:00 - Apr 12 13:00 ||Apr 12 16:10 - || ||K1:GRD-MICH_LOCK_STATE_N ||MICH guardian state. If this is 1000, MICH is locked and calibration lines are injected. ||same, but there was a bug ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1516|klog #1516]]) ||Same (bug was fixed on Apr 13 10:54:30 JST) || ||K1:LSC-REFL_PDA1_DC_OUT_DQ ||Fringe signal in DC. Used for the error signal. ||Same, but not used for the error signal. ||Same || ||K1:LSC-REFL_PDA1_RF17_I_ERR_DQ ||N/A ||Fringe signal in RF (demodulated in I phase). Used for the error signal. ||Same, but not used for the error signal. Was not DQ channel before Apr 14 13pm (use I_OUT_DQ instead; IQ rotation angle: -15 deg). || ||K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ ||N/A ||Fringe signal in RF (demodulated in Q phase). ||Same, but used for the error signal. Was not DQ channel before Apr 14 13pm (use Q_OUT_DQ instead; IQ rotation angle: -15 deg). || ||K1:LSC-MICH_OUT_DQ ||Feedback signal to ETMs. ||Feedback signal to ETMs before gain adjustment from UGF servo. ||Same || ||K1:LSC-UGF_SERVO_OUT_DQ ||N/A ||Gain adjustment of the feedback signal for UGF servo. ||Same || ||K1:LSC-MICH_ERR_CAL_OUT_DQ ||Roughly calibrated GW signal in m/rtHz. ||Same ||N/A || ||K1:LSC-MICH_CTRL_CAL_OUT_DQ ||N/A ||Online-calibrated GW signal in nm. ||Same || ||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. ||Same ||N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. ||Same ||N/A || ||K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ ||N/A ||N/A ||Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz. || ||K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ ||N/A ||N/A ||Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz. || ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ ||N/A ||N/A ||Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ ||N/A ||N/A ||Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ ||N/A ||N/A ||Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ ||QPD signal monitoring IMMT1 transmitted beam, calibrated in um. ||Same ||Same || |
|
| Line 27: | Line 46: |
| ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-MICH_LOCK_STATE_N||MICH guardian state. If this is 1000, MICH is locked and calibration lines are injected.|| same, but there was a bug ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1516|klog #1516]]) || Same (bug was fixed on Apr 13 10:54:30 JST)|| ||K1:LSC-REFL_PDA1_DC_OUT_DQ||Fringe signal in DC. Used for the error signal.|| Same, but not used for the error signal.||Same|| ||K1:LSC-REFL_PDA1_RF17_I_ERR_DQ||N/A||Fringe signal in RF (demodulated in I phase). Used for the error signal.||Same, but not used for the error signal. Was not DQ channel before Apr 14 13pm (use I_OUT_DQ instead; IQ rotation angle: -15 deg). || ||K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ||N/A||Fringe signal in RF (demodulated in Q phase). ||Same, but used for the error signal. Was not DQ channel before Apr 14 13pm (use Q_OUT_DQ instead; IQ rotation angle: -15 deg).|| ||K1:LSC-MICH_OUT_DQ||Feedback signal to ETMs. ||Feedback signal to ETMs before gain adjustment from UGF servo.|| Same || ||K1:LSC-UGF_SERVO_OUT_DQ||N/A ||Gain adjustment of the feedback signal for UGF servo.|| Same || ||K1:LSC-MICH_ERR_CAL_OUT_DQ ||Roughly calibrated GW signal in m/rtHz. || Same || N/A || ||K1:LSC-MICH_CTRL_CAL_OUT_DQ ||N/A ||Online-calibrated GW signal in nm.|| Same || ||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz.|| ||K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz.|| ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ||QPD signal monitoring IMMT1 transmitted beam, calibrated in um.|| Same || Same || |
|
| Line 46: | Line 48: |
| ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ||Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW.|| Same || Same || |
||Channel Name ||Mar 25 9:00 - Mar 31 17:00 ||Apr 11 9:00 - Apr 12 13:00 ||Apr 12 16:10 - || ||K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ ||Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW. ||Same ||Same || |
| Line 50: | Line 53: |
| ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:PEM-$(PLACE)_SEIS_$(AXIS)_SENSINF_OUT_DQ||N/A||Trillium seismometer signal. $(PLACE)=BS,EX,EY and $(AXIS)=NS,WE,Z. Calibration was done wrong. ||Same, but wrong calibration filter was turned off on Apr 14 16pm ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1537|klog #1537]]). Calibration was corrected on Apr 15 22:30 in the unit of m/s ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1547|klog #1547]]).|| ||K1:PEM-MCF_SEIS_Y_SENSINF_OUT_DQ||N/A||RION seismometer signal, calibrated in the unit of m.||Same, but calibration was changed on Apr 15 22:30 in the unit of m/s^2 ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1547|klog #1547]]).|| ||K1:PEM-$(PLACE)_SEIS_$(AXIS)_BLRMS_LOW_OUT_DQ||N/A||Seismometer signal filtered for earthquake bands (30-100mHz).||Same|| |
||Channel Name ||Mar 25 9:00 - Mar 31 17:00 ||Apr 11 9:00 - Apr 12 13:00 ||Apr 12 16:10 - || ||K1:PEM-$(PLACE)_SEIS_$(AXIS)_SENSINF_OUT_DQ ||N/A ||Trillium seismometer signal. $(PLACE)=BS,EX,EY and $(AXIS)=NS,WE,Z. Calibration was done wrong. ||Same, but wrong calibration filter was turned off on Apr 14 16pm ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1537|klog #1537]]). Calibration was corrected on Apr 15 22:30 in the unit of m/s ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1547|klog #1547]]). || ||K1:PEM-MCF_SEIS_Y_SENSINF_OUT_DQ ||N/A ||RION seismometer signal, calibrated in the unit of m. ||Same, but calibration was changed on Apr 15 22:30 in the unit of m/s^2 ([[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1547|klog #1547]]). || ||K1:PEM-$(PLACE)_SEIS_$(AXIS)_BLRMS_LOW_OUT_DQ ||N/A ||Seismometer signal filtered for earthquake bands (30-100mHz). ||Same || |
| Line 57: | Line 61: |
| * [[http://seikai.icrr.u-tokyo.ac.jp/~chino/cgi-bin/dailyFrame.cgi| Daily Summary page for off-site]] | * [[http://seikai.icrr.u-tokyo.ac.jp/~chino/cgi-bin/dailyFrame.cgi|Daily Summary page for off-site]] |
Important Channels for iKAGRA
Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are in counts if not specified.
PMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-PSL_STATE_N |
PMC guardian state. If this is 1000, PMC is locked. |
Same |
Same |
K1:PSL-PMC_TRANS_DC_OUT_DQ |
PMC transmitted power. If this is ~6, PMC is locked. |
Same |
Same |
K1:PSL-PMC_MIXER_OUT_DQ |
PMC error signal. |
Same |
Same |
K1:PSL-PMC_FAST_MON_OUT_DQ |
PMC feedback signal to PMC PZT. |
Same |
Same |
K1:PSL-PMC_SLOW_MON_OUT_DQ |
PMC feedback signal to laser temperature. |
Same |
Same |
IMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-IMC_LOCK_STATE_N |
IMC guardian state. If this is 1000, IMC is locked. |
Same |
Same |
K1:IMC-MCL_TRANS_OUT_DQ |
IMC transmitted power. If this is ~0.4, IMC is locked. |
Same |
Same |
K1:IMC-MCL_SERVO_OUT_DQ |
IMC feedback signal to MCe. |
Same |
Same, but MCi feedback was added on Apr 12 13:44 JST (klog #1507). |
K1:IMC-REFL_SERVO_FLTIN_OUT_DQ |
IMC error signal. |
Same |
Same |
K1:IMC-REFL_SERVO_FLTFAST_OUT_DQ |
IMC feedback signal to the laser PZT. |
Same |
The port for a laser PZT feed back signal have been changed to FLTSLOW channel. |
K1:IMC-REFL_SERVO_FLTSLOW_OUT_DQ |
Not used |
Not used |
IMC feedback signal to the laser PZT. |
K1:VIS-MCI_DITHERINF_Y_IN1_DQ |
N/A |
MCi dither asc error signal. |
Same |
K1:VIS-MCI_DITHERINF_Y_OUT_DQ |
N/A |
MCi dither asc feedback signal to the MCi. |
Same |
K1:VIS-MCE_DITHERINF_Y_IN1_DQ |
N/A |
MCe dither asc error signal. |
Same |
K1:VIS-MCE_DITHERINF_Y_OUT_DQ |
N/A |
MCe dither asc feedback signal to the MCe. |
Same |
Michelson related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-MICH_LOCK_STATE_N |
MICH guardian state. If this is 1000, MICH is locked and calibration lines are injected. |
same, but there was a bug (klog #1516) |
Same (bug was fixed on Apr 13 10:54:30 JST) |
K1:LSC-REFL_PDA1_DC_OUT_DQ |
Fringe signal in DC. Used for the error signal. |
Same, but not used for the error signal. |
Same |
K1:LSC-REFL_PDA1_RF17_I_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in I phase). Used for the error signal. |
Same, but not used for the error signal. Was not DQ channel before Apr 14 13pm (use I_OUT_DQ instead; IQ rotation angle: -15 deg). |
K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in Q phase). |
Same, but used for the error signal. Was not DQ channel before Apr 14 13pm (use Q_OUT_DQ instead; IQ rotation angle: -15 deg). |
K1:LSC-MICH_OUT_DQ |
Feedback signal to ETMs. |
Feedback signal to ETMs before gain adjustment from UGF servo. |
Same |
K1:LSC-UGF_SERVO_OUT_DQ |
N/A |
Gain adjustment of the feedback signal for UGF servo. |
Same |
K1:LSC-MICH_ERR_CAL_OUT_DQ |
Roughly calibrated GW signal in m/rtHz. |
Same |
N/A |
K1:LSC-MICH_CTRL_CAL_OUT_DQ |
N/A |
Online-calibrated GW signal in nm. |
Same |
K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz. |
K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz. |
K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). |
K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ |
QPD signal monitoring IMMT1 transmitted beam, calibrated in um. |
Same |
Same |
Suspension related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ |
Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW. |
Same |
Same |
PEM related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:PEM-$(PLACE)_SEIS_$(AXIS)_SENSINF_OUT_DQ |
N/A |
Trillium seismometer signal. $(PLACE)=BS,EX,EY and $(AXIS)=NS,WE,Z. Calibration was done wrong. |
Same, but wrong calibration filter was turned off on Apr 14 16pm (klog #1537). Calibration was corrected on Apr 15 22:30 in the unit of m/s (klog #1547). |
K1:PEM-MCF_SEIS_Y_SENSINF_OUT_DQ |
N/A |
RION seismometer signal, calibrated in the unit of m. |
Same, but calibration was changed on Apr 15 22:30 in the unit of m/s^2 (klog #1547). |
K1:PEM-$(PLACE)_SEIS_$(AXIS)_BLRMS_LOW_OUT_DQ |
N/A |
Seismometer signal filtered for earthquake bands (30-100mHz). |
Same |