|
Size: 1409
Comment:
|
Size: 3300
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 6: | Line 6: |
| ||Channel Name ||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || | ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-PSL_LOCK_STATE_N||PMC guardian state. If this is 1000(???), PMC is locked.|| Same || Same || |
| Line 10: | Line 11: |
| ||Channel Name ||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || | ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-IMC_LOCK_STATE_N||IMC guardian state. If this is 1000, IMC is locked.|| Same || Same || |
| Line 15: | Line 17: |
| ||Channel Name ||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:LSC-REFL_PDA1_DC_OUT_DQ ||Fringe signal in DC. Used for the error signal.|| Same, but not used for the error signal.||Same|| |
||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:GRD-MICH_LOCK_STATE_N||MICH guardian state. If this is 1000, MICH is locked.|| Same || Same || ||K1:LSC-REFL_PDA1_DC_OUT_DQ||Fringe signal in DC. Used for the error signal.|| Same, but not used for the error signal.||Same|| |
| Line 19: | Line 22: |
| ||K1:LSC-MICH_OUT_DQ||Feedback signal to ETMs. ||Feedback signal to ETMs before gain adjustment from UGF servo.|| Same || ||K1:LSC-UGF_SERVO_OUT_DQ||N/A ||Gain adjustment of the feedback signal for UGF servo.|| Same || ||K1:LSC-MICH_ERR_CAL_OUT_DQ ||Roughly calibrated GW signal in m/rtHz. || Same || Same || ||K1:LSC-MICH_CTRL_CAL_OUT_DQ ||N/A ||Online-calibrated GW signal in nm/rtHz.|| Same || ||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated signal before calibration lines injection. CAL1 for 80 Hz (used ofr UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_DEMOD1_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 135 Hz(???) calibration line injection.|| ||K1:LSC-MICH_CAL_DEMOD2_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 80 Hz(???) calibration line injection for UGF servo. || ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 111 Hz calibration line injection for ETMX actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 113 Hz calibration line injection for ETMY actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 115 Hz calibration line injection for BS actuator efficiency monitor. || |
|
| Line 21: | Line 36: |
| ||Channel Name ||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || | ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || |
| Line 25: | Line 40: |
| * http://klog.icrr.u-tokyo.ac.jp/osl/?r=1506 * http://seikai.icrr.u-tokyo.ac.jp/~chino/cgi-bin/dailyFrame.cgi * http://10.68.10.130/~detchar/cgi-bin/dailyFrame.cgi * http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=5101 |
* [[http://10.68.10.130/~detchar/cgi-bin/dailyFrame.cgi |Daily summary page for Kamioka site]] * [[http://seikai.icrr.u-tokyo.ac.jp/~chino/cgi-bin/dailyFrame.cgi| Daily Summary page for off-site]] * [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=5101|Summary of iKAGRA Test Run March 2016 (JGW-T1605101)]] * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1506|Channel name change on Apr 12 (klog #1506)]] * |
Important Channels for iKAGRA
Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are also given.
PMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-PSL_LOCK_STATE_N |
PMC guardian state. If this is 1000(???), PMC is locked. |
Same |
Same |
|
|
|
|
IMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-IMC_LOCK_STATE_N |
IMC guardian state. If this is 1000, IMC is locked. |
Same |
Same |
|
|
|
|
Michelson related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-MICH_LOCK_STATE_N |
MICH guardian state. If this is 1000, MICH is locked. |
Same |
Same |
K1:LSC-REFL_PDA1_DC_OUT_DQ |
Fringe signal in DC. Used for the error signal. |
Same, but not used for the error signal. |
Same |
K1:LSC-REFL_PDA1_RF17_I_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in I phase). Used for the error signal. |
Same, but not used for the error signal. |
K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in Q phase). |
Same, but used for the error signal. |
K1:LSC-MICH_OUT_DQ |
Feedback signal to ETMs. |
Feedback signal to ETMs before gain adjustment from UGF servo. |
Same |
K1:LSC-UGF_SERVO_OUT_DQ |
N/A |
Gain adjustment of the feedback signal for UGF servo. |
Same |
K1:LSC-MICH_ERR_CAL_OUT_DQ |
Roughly calibrated GW signal in m/rtHz. |
Same |
Same |
K1:LSC-MICH_CTRL_CAL_OUT_DQ |
N/A |
Online-calibrated GW signal in nm/rtHz. |
Same |
K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ |
Demodulated signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ |
Demodulated signal before calibration lines injection. CAL1 for 80 Hz (used ofr UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_CAL_DEMOD1_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated signal after(???) 135 Hz(???) calibration line injection. |
K1:LSC-MICH_CAL_DEMOD2_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated signal after(???) 80 Hz(???) calibration line injection for UGF servo. |
K1:LSC-ACT_DEMOD1_(I|Q)_OUT |
N/A |
N/A |
Demodulated signal after(???) 111 Hz calibration line injection for ETMX actuator efficiency monitor. |
K1:LSC-ACT_DEMOD2_(I|Q)_OUT |
N/A |
N/A |
Demodulated signal after(???) 113 Hz calibration line injection for ETMY actuator efficiency monitor. |
K1:LSC-ACT_DEMOD3_(I|Q)_OUT |
N/A |
N/A |
Demodulated signal after(???) 115 Hz calibration line injection for BS actuator efficiency monitor. |
Suspension related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
|
|
|
|