|
Size: 3300
Comment:
|
Size: 4985
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are also given. | Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are in counts if not specified. |
| Line 7: | Line 7: |
| ||K1:GRD-PSL_LOCK_STATE_N||PMC guardian state. If this is 1000(???), PMC is locked.|| Same || Same || || || || || || |
||K1:GRD-PSL_STATE_N||PMC guardian state. If this is 1000, PMC is locked.|| Same || Same || ||K1:PSL-PMC_TRANS_DC_OUT_DQ||PMC transmitted power. If this is ~6, PMC is locked.|| Same || Same || ||K1:PSL-PMC_MIXER_OUT_DQ||PMC error signal(???). || Same || Same || ||K1:PSL-PMC_FAST_MON_OUT_DQ||PMC feedback signal to PMC PZT. || Same || Same || ||K1:PSL-PMC_SLOW_MON_OUT_DQ||PMC feedback signal to laser temperature. || Same || Same || |
| Line 13: | Line 16: |
| || || || || || | ||K1:IMC-MCL_TRANS_OUT_DQ||IMC transmitted power. If this is ~0.4, IMC is locked.|| Same || Same || ||K1:IMC-MCL_SERVO_OUT_DQ||IMC feedback signal to MCE and MCI. MCI feedback was added on 4/12 4:44 UTC. ||Same||Same, but feedback signal is also fedback to MCi.|| |
| Line 20: | Line 24: |
| ||K1:LSC-REFL_PDA1_RF17_I_ERR_DQ||N/A||Fringe signal in RF (demodulated in I phase). Used for the error signal.||Same, but not used for the error signal.|| ||K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ||N/A||Fringe signal in RF (demodulated in Q phase). ||Same, but used for the error signal.|| |
||K1:LSC-REFL_PDA1_RF17_I_ERR_DQ||N/A||Fringe signal in RF (demodulated in I phase). Used for the error signal.||Same, but not used for the error signal. Was not DQ channel before Apr 14 13pm (use I_OUT_DQ instead; IQ rotation angle: -15 deg). || ||K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ||N/A||Fringe signal in RF (demodulated in Q phase). ||Same, but used for the error signal. Was not DQ channel before Apr 14 13pm (use Q_OUT_DQ instead; IQ rotation angle: -15 deg).|| |
| Line 26: | Line 30: |
| ||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated signal before calibration lines injection. CAL1 for 80 Hz (used ofr UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_DEMOD1_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 135 Hz(???) calibration line injection.|| ||K1:LSC-MICH_CAL_DEMOD2_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 80 Hz(???) calibration line injection for UGF servo. || ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 111 Hz calibration line injection for ETMX actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 113 Hz calibration line injection for ETMY actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT||N/A|| N/A || Demodulated signal after(???) 115 Hz calibration line injection for BS actuator efficiency monitor. || |
||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz.|| ||K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz.|| ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ||QPD signal monitoring IMMT1 transmitted beam, calibrated in um.|| Same || Same || |
| Line 37: | Line 41: |
| || || || || || | ||K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ||Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW.|| Same || Same || == PEM related == ||Channel Name||Mar 25 9:00 - Mar 31 17:00||Apr 11 9:00 - Apr 12 13:00||Apr 12 16:10 - || ||K1:PEM-$(PLACE)_SEIS_$(DIR)_SENSINF_OUT_DQ||N/A||Seismometer signal in m. $(OPTIC)=BS,EX,EY and $(DOF)=NS,WE,Z. for $(OPTIC)=MCF, $(DIR)= only Y.||Same|| ||K1:PEM-$(PLACE)_SEIS_$(DIR)_BLRMS_LOW_OUT_DQ||N/A||Seismometer signal filtered for earthquake bands (30-100mHz).||Same|| |
| Line 40: | Line 49: |
| * [[http://10.68.10.130/~detchar/cgi-bin/dailyFrame.cgi |Daily summary page for Kamioka site]] | * [[http://10.68.10.130/~detchar/cgi-bin/dailyFrame.cgi|Daily summary page for Kamioka site]] |
| Line 43: | Line 52: |
| * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1506|Channel name change on Apr 12 (klog #1506)]] * |
* [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1506|MICH channel name change on Apr 12 (klog #1506)]] * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1507|IMC servo change on Apr 12 (klog #1507)]] * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=1508|IMC servo change on Apr 12 (klog #1508)]] |
Important Channels for iKAGRA
Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are in counts if not specified.
PMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-PSL_STATE_N |
PMC guardian state. If this is 1000, PMC is locked. |
Same |
Same |
K1:PSL-PMC_TRANS_DC_OUT_DQ |
PMC transmitted power. If this is ~6, PMC is locked. |
Same |
Same |
K1:PSL-PMC_MIXER_OUT_DQ |
PMC error signal(???). |
Same |
Same |
K1:PSL-PMC_FAST_MON_OUT_DQ |
PMC feedback signal to PMC PZT. |
Same |
Same |
K1:PSL-PMC_SLOW_MON_OUT_DQ |
PMC feedback signal to laser temperature. |
Same |
Same |
IMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-IMC_LOCK_STATE_N |
IMC guardian state. If this is 1000, IMC is locked. |
Same |
Same |
K1:IMC-MCL_TRANS_OUT_DQ |
IMC transmitted power. If this is ~0.4, IMC is locked. |
Same |
Same |
K1:IMC-MCL_SERVO_OUT_DQ |
IMC feedback signal to MCE and MCI. MCI feedback was added on 4/12 4:44 UTC. |
Same |
Same, but feedback signal is also fedback to MCi. |
Michelson related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-MICH_LOCK_STATE_N |
MICH guardian state. If this is 1000, MICH is locked. |
Same |
Same |
K1:LSC-REFL_PDA1_DC_OUT_DQ |
Fringe signal in DC. Used for the error signal. |
Same, but not used for the error signal. |
Same |
K1:LSC-REFL_PDA1_RF17_I_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in I phase). Used for the error signal. |
Same, but not used for the error signal. Was not DQ channel before Apr 14 13pm (use I_OUT_DQ instead; IQ rotation angle: -15 deg). |
K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in Q phase). |
Same, but used for the error signal. Was not DQ channel before Apr 14 13pm (use Q_OUT_DQ instead; IQ rotation angle: -15 deg). |
K1:LSC-MICH_OUT_DQ |
Feedback signal to ETMs. |
Feedback signal to ETMs before gain adjustment from UGF servo. |
Same |
K1:LSC-UGF_SERVO_OUT_DQ |
N/A |
Gain adjustment of the feedback signal for UGF servo. |
Same |
K1:LSC-MICH_ERR_CAL_OUT_DQ |
Roughly calibrated GW signal in m/rtHz. |
Same |
Same |
K1:LSC-MICH_CTRL_CAL_OUT_DQ |
N/A |
Online-calibrated GW signal in nm/rtHz. |
Same |
K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz. |
K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz. |
K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). |
K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ |
QPD signal monitoring IMMT1 transmitted beam, calibrated in um. |
Same |
Same |
Suspension related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ |
Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW. |
Same |
Same |
PEM related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:PEM-$(PLACE)_SEIS_$(DIR)_SENSINF_OUT_DQ |
N/A |
Seismometer signal in m. $(OPTIC)=BS,EX,EY and $(DOF)=NS,WE,Z. for $(OPTIC)=MCF, $(DIR)= only Y. |
Same |
K1:PEM-$(PLACE)_SEIS_$(DIR)_BLRMS_LOW_OUT_DQ |
N/A |
Seismometer signal filtered for earthquake bands (30-100mHz). |
Same |