|
Size: 4299
Comment:
|
Size: 4375
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 30: | Line 30: |
| ||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_DEMOD1_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 135 Hz(???) calibration line injection.|| ||K1:LSC-MICH_CAL_DEMOD2_(I|Q)_OUT_DQ || N/A || N/A ||Demodulated signal after(???) 80 Hz(???) calibration line injection for UGF servo. || ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated signal after(???) 111 Hz calibration line injection for ETMX actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated signal after(???) 113 Hz calibration line injection for ETMY actuator efficiency monitor. || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated signal after(???) 115 Hz calibration line injection for BS actuator efficiency monitor. || |
||K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ ||Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. || Same || N/A || ||K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz.|| ||K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ || N/A || N/A ||Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz.|| ||K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). || ||K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). || ||K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ||N/A|| N/A || Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). || |
Important Channels for iKAGRA
Here is a list of important channels for iKAGRA Test Run. Time is given in JST. Units are in counts if not specified.
PMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-PSL_LOCK_STATE_N |
PMC guardian state. If this is 1000(???), PMC is locked. |
Same |
Same |
K1:PSL-PMC_TRANS_DC_OUT_DQ |
PMC transmitted power. If this is ~6, PMC is locked. |
Same |
Same |
K1:PSL-PMC_MIXER_OUT_DQ |
PMC error signal(???). |
Same |
Same |
K1:PSL-PMC_FAST_MON_OUT_DQ |
PMC feedback signal to PMC PZT. |
Same |
Same |
K1:PSL-PMC_SLOW_MON_OUT_DQ |
PMC feedback signal to laser temperature. |
Same |
Same |
IMC related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-IMC_LOCK_STATE_N |
IMC guardian state. If this is 1000, IMC is locked. |
Same |
Same |
K1:IMC-MCL_TRANS_OUT_DQ |
IMC transmitted power. If this is ~0.4, IMC is locked. |
Same |
Same |
K1:IMC-MCL_SERVO_OUT_DQ |
IMC feedback signal to MCe(???). |
Same |
Same, but feedback signal is also fedback to MCi. |
Michelson related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:GRD-MICH_LOCK_STATE_N |
MICH guardian state. If this is 1000, MICH is locked. |
Same |
Same |
K1:LSC-REFL_PDA1_DC_OUT_DQ |
Fringe signal in DC. Used for the error signal. |
Same, but not used for the error signal. |
Same |
K1:LSC-REFL_PDA1_RF17_I_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in I phase). Used for the error signal. |
Same, but not used for the error signal. |
K1:LSC-REFL_PDA1_RF17_Q_ERR_DQ |
N/A |
Fringe signal in RF (demodulated in Q phase). |
Same, but used for the error signal. |
K1:LSC-MICH_OUT_DQ |
Feedback signal to ETMs. |
Feedback signal to ETMs before gain adjustment from UGF servo. |
Same |
K1:LSC-UGF_SERVO_OUT_DQ |
N/A |
Gain adjustment of the feedback signal for UGF servo. |
Same |
K1:LSC-MICH_ERR_CAL_OUT_DQ |
Roughly calibrated GW signal in m/rtHz. |
Same |
Same |
K1:LSC-MICH_CTRL_CAL_OUT_DQ |
N/A |
Online-calibrated GW signal in nm/rtHz. |
Same |
K1:LSC-MICH_LKIN_CAL(1|2)_A_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal after calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_LKIN_CAL(1|2)_B_(REAL|IMAG)_OUT_DQ |
Demodulated feedback signal before calibration lines injection. CAL1 for 80 Hz (used for UGF servo), CAL2 for 135 Hz. |
Same |
N/A |
K1:LSC-MICH_CAL_A(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal after calibration line injection. A1 for 80 Hz (used for UGF servo), A2 for 135 Hz. |
K1:LSC-MICH_CAL_B(1|2)_(REAL|IMAG)_OUT_DQ |
N/A |
N/A |
Demodulated feedback signal before calibration line injection for UGF servo. B1 for 80 Hz (used for UGF servo), B2 for 135 Hz. |
K1:LSC-ACT_DEMOD1_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMX actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-ACT_DEMOD2_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for ETMY actuator efficiency monitor (113 Hz calibration line). |
K1:LSC-ACT_DEMOD3_(I|Q)_OUT_DQ |
N/A |
N/A |
Demodulated error signal for BS actuator efficiency monitor (111 Hz calibration line). |
K1:LSC-IMT_QPDA1_(PIT|YAW)_OUT_DQ |
QPD signal monitoring IMMT1 transmitted beam, calibrated in um. |
Same |
Same |
Suspension related
Channel Name |
Mar 25 9:00 - Mar 31 17:00 |
Apr 11 9:00 - Apr 12 13:00 |
Apr 12 16:10 - |
K1:VIS-$(OPTIC)_TM_OPLEV_$(DOF)_OUT_DQ |
Oplev signal for suspensions in um. $(OPITC)=MCI,MCO,MCE,PR3,BS,ETMX,ETMY and $(DOF)=PIT,YAW. |
Same |
Same |