3067
Comment:
|
3123
|
Deletions are marked like this. | Additions are marked like this. |
Line 42: | Line 42: |
||EX ||X Arm End Test Mass|| ||EY ||Y Arm End Test Mass|| |
||EX/ETMX ||X Arm End Test Mass|| ||EY/ETMY ||Y Arm End Test Mass|| |
Line 50: | Line 50: |
||LSC ||Length Sensing and Control|| ||MCi/e/o ||name of three mirrors of IMC; Input, End, and Output mirrors || |
||LSC ||Length Sensing and Control, especially for MIF|| ||MCi/e/o ||Name of three mirrors of IMC; Input, End, and Output mirrors || |
Line 55: | Line 55: |
||OpLev ||Optical Lever|| | ||OpLev ||Optical Lever; measures angle of mirror|| |
This page is preliminary. Members of observation shift should update this page.
basic tasks
you have to take the logbook to report the incident during the observation shift (see IFO Operational Manual)
you have to check the check list to avoid mistake during the observation shift (Check List)
ここから先は観測シフトの仕事を簡単にまとめたものです。まだ暫定的なメモのような状態なので、適宜アップデートして下さい。ここは分かりやすさのために日本語で書きます。余裕のある方は英語版も作って下さい。
[General]
- まずコントロールルームのPCのapplication→terminal→mk→sitemapが開かれる
[DGS]
- sitemap→CDS→DAQが全部緑になっているかどうかを確認。緑じゃなければその項目のボタンを押し、statusが0×0になっているか確認。なっていなれけば宮川さんか苔山さんに連絡。
[MIF]
- sitemap→guardian→MICH_LOCKとIMC_LOCKを確認。PSLは3月中は触らない。(IMCがロックしていればIMC_MCI_TRANS_OUTPUTは0.35くらい)
[VIS]
- sitemap→VIS→PR3の画面右側のWATCHDOG、DACKILL IOPが緑かどうかを確認。
[DMG]
- DMG Check-Sheetを2時間おきに書く。コントロールルーム隣のサーバールームのPCを見て、Check-SheetのIn case of normalを満たしているか確認。Is the log outputs normal?は、PC画面に赤か黄のメッセージが出てこなければOK。
[klog]
- klogに干渉計の状況を簡単に報告。
useful information
- terminology
Abbreviation / Acronym |
Meaning / Explanation |
BS |
Beam Splitter |
CDS |
|
DAQ |
Data Acquisition |
DAS |
Data Analysis |
DC |
Direct Current |
DET/Detchar |
Detector Characterization |
DGS |
Digital System |
DMG |
Data Management |
EPICS |
Experimental Physics and Industrial Control System |
EX/ETMX |
X Arm End Test Mass |
EY/ETMY |
Y Arm End Test Mass |
FCL |
Facility |
GAS |
Geometric Anti-Spring |
GIF |
Geophysics Interferometer |
Guardian |
Automation system for interferometers |
IFO |
Interferometer Optics |
IMC |
Input Mode Cleaner |
LSC |
Length Sensing and Control, especially for MIF |
MCi/e/o |
Name of three mirrors of IMC; Input, End, and Output mirrors |
Medm |
GUI for dealing with EPICS |
MI |
Michealson Interferometer |
MIF |
Main Interferometer |
Optical Lever; measures angle of mirror |
|
OSEM |
Optical Sensor and ElectroMagnet |
PMC |
Pre-Mode Cleaner |
PR3 |
Type Bp’ SAS. works as the last steering mirror for MI |
PSL |
Pre-Stabilized Laser |
SAS |
Seismic Attenuation System |
TM |
Test Mass |
VAC |
Vacuum |
VIS |
Vibration Isolation System |
- how to search JGW document