This page is preliminary. Members of observation shift should update this page.
basic tasks
- you have to take the logbook to report the incident during the observation shift (see IFO Operational Manual)
- you have to check the check list to avoid mistake during the observation shift (JGW-T1604975-v5)
ここから先は観測シフトの具体的な仕事をまとめたものです。まだ暫定的なメモのような状態なので、適宜アップデートして下さい。ここは分かりやすさのために日本語で書きます。余裕のある方は英語版も作って下さい。
- まずコントロールルームのPCのapplication→terminal→mk→sitemapが開かれる
- sitemap→CDS→DAQが全部緑になっているかどうかをチェック。緑じゃなければその項目のボタンを押し、statusが0×0になっているか確認。なっていなれけば宮川さんか苔山さんに連絡。
- sitemap→guardian→MICH_LOCKとIMC_LOCKを確認。PSLは3月中は触らない。(IMC_MCI_TRANS_OUTPUTはロックしていれば0.35くらい)
- VISはよくわからないが、ひとまず画面右側の
- DMG Check-Sheetを2時間おきに書く。コントロールルーム隣のサーバールームのPCを見て、Check-SheetのIn case of normalを満たしているか確認。Is the log outputs normal?は、PC画面に赤か黄のメッセージが出てこなければOK。
- * PSL→3月中は触らない。CCDモニタで一応ロックしているかチェック。
- klogに干渉計の状況を簡単に報告。
useful information
- terminology
Abbreviation / Acronym |
Meaning / Explanation |
BS |
Beam Splitter |
CDS |
|
DAQ |
Data Acquisition |
DAS |
Data Analysis |
DET/Detchar |
Detector Characterization |
DGS |
Digital System |
DMG |
Data Management |
EPICS |
Experimental Physics and Industrial Control System |
EX |
X Arm End Test Mass |
EY |
Y Arm End Test Mass |
FCL |
Facility |
GAS |
Geometric Anti-Spring |
GIF |
Geophysics Interferometer |
Guardian |
Automation system for interferometers |
IFO |
Interferometer Optics |
IMC |
Input Mode Cleaner |
LSC |
Length Sensing and Control |
Medm |
GUI for dealing with EPICS |
MI |
Michealson Interferometer |
OSEM |
Optical Sensor and ElectroMagnet |
PMC |
Pre-Mode Cleaner |
PR3 |
Type Bp’ SAS. works as the last steering mirror for MI |
PSL |
Pre-Stabilized Laser |
SAS |
Seismic Attenuation System |
VAC |
Vacuum |
VIS |
Vibration Isolation System |
MIF |
- how to search JGW document