Differences between revisions 3 and 5 (spanning 2 versions)
⇤ ← Revision 3 as of 2016-02-02 11:04:14 →
Size: 363
Editor: OsamuMiyakawa
Comment:
← Revision 5 as of 2016-02-12 11:15:22 → ⇥
Size: 510
Editor: KeikoKokeyama
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
  * Check each GDS_TP screen if CDS list has red alert.   * Check each GDS_TP screen if CDS list had red alert.
   * If CPU MAX is read, press "Diag Reset" button.
Line 6: Line 7:
 * check frames are being written.  * CheckDaq1 check the real time models are sending data to the data concentrator.
 * CheckDaq2 check frames are being written.

Check list

  • Check CDS list on MEDM.
    • Check each GDS_TP screen if CDS list had red alert.
      • If CPU MAX is read, press "Diag Reset" button.
  • Check daqd is running at dc0/nds0/nds1/fw0/fw1 (on monit)

  • CheckDaq1 check the real time models are sending data to the data concentrator.

  • CheckDaq2 check frames are being written.

In the case of IFO/subsystem failure or emergency

  • Call Osamu Miyakawa or Keiko Kokeyama (The phone number list will be in the control room.)

KAGRA/Observation/iKAGRA/Manual/DGS (last edited 2016-02-12 11:15:44 by KeikoKokeyama)