Differences between revisions 1 and 12 (spanning 11 versions)
⇤ ← Revision 1 as of 2019-12-02 00:01:54 →
Size: 407
Editor: miyoki
Comment:
← Revision 12 as of 2019-12-02 00:18:08 → ⇥
Size: 1128
Editor: miyoki
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
 * UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
 
 * Mac OSX : X11 is required.
 
 * Windows10 : Cygwin is required.
  *Cygwin installation itself is explained here https://www.cygwin.com/ .
  * X11 option, NT option should be installed, additionally.
  *These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin		 === PC Preparation ===

 *'''Network'''
  * The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctr-A", "k1ctr-G" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
  * If you want to use utp cable network connection for DGS network in the KAGRA data analysys building, please ask Miyoki and Miyakawa.
 *'''PCs to Launch Xterm'''
  * UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
  * Mac OSX : X11 is required.
  * Windows10 : Cygwin is required.
   *Cygwin installation itself is explained here https://www.cygwin.com/ .
   * X11 option, NT option should be installed, additionally.
   *These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin

=== Open Xterm and ssh ===
 * Type "ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp" or double click the Xterm icon in UNIX machines.
 * Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.

PC Preparation

  • Network

    • The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctr-A", "k1ctr-G" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
    • If you want to use utp cable network connection for DGS network in the KAGRA data analysys building, please ask Miyoki and Miyakawa.

  • PCs to Launch Xterm

Open Xterm and ssh

  • Type "ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp" or double click the Xterm icon in UNIX machines.

  • Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.

KAGRA/Operation/Manuals/Basic/PC_Environment (last edited 2019-12-17 17:27:08 by miyoki)