Diff for "KAGRA/Operation/Manuals/Basic/PC_Environment"

Differences between revisions 12 and 13

Network
- The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctr-A", "k1ctr-G" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
- If you want to use utp cable network connection for DGS network in the KAGRA data analysys building, please ask Miyoki and Miyakawa.
PCs to Launch Xterm
- UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
- Mac OSX : X11 is required.
- Windows10 : Cygwin is required.
  - Cygwin installation itself is explained here https://www.cygwin.com/ .
  - X11 option, NT option should be installed, additionally.
  - These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin

UNIX
- You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.
MacOS X11 and Windows Cygwin X11
- Launch Xterm.
- Type "ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp" or double click the Xterm icon in UNIX machines.
- Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.

KAGRA/Operation/Manuals/Basic/PC_Environment (last edited 2019-12-17 17:27:08 by miyoki)

-  ⇤ ← Revision 12 as of 2019-12-02 00:18:08 → 
  Size: 1128
  Editor: miyoki
  Comment:
+   ← Revision 13 as of 2019-12-02 00:20:48 → ⇥
  Size: 1322
  Editor: miyoki
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 15:
- * Type "ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp" or double click the Xterm icon in UNIX machines.
 * Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.
+ *'''UNIX'''
  * You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.
 *'''MacOS X11 and Windows Cygwin X11'''
  * Launch Xterm.
  * Type "ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp" or double click the Xterm icon in UNIX machines.
  * Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.