PC Preparation

• Network

  • The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctr-A", "k1ctr-G" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
  • If you want to use utp cable network connection to enter DGS network in the KAGRA data analysis building, please ask "Miyoki" and "Miyakawa".

• PCs to Launch Xterm or Basic applications

  • UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
  • Mac OSX : X11 is required.
  • Windows10 : Cygwin is required.

    • Cygwin installation itself is explained here https://www.cygwin.com/ .

    • X11 option, NT option should be installed, additionally.

    • These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin

Open Xterm and ssh

• UNIX

  • You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.

• MacOS X11 and Windows Cygwin X11

  • Launch Xterm.
  • Type "ssh -Y controls@k1ctr*.kagra.icrr.u-tokyo.ac.jp". * can be 1 ~ 9.
  • Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.