|
Size: 1324
Comment:
|
Size: 1322
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 4: | Line 4: |
| * The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctr-A", "k1ctr-G" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass. | * The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctrA", "k1ctrG" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass. |
PC Preparation
Network
- The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctrA", "k1ctrG" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
- If you want to use utp cable network connection to enter DGS network in the KAGRA data analysis building, please ask "Miyoki" and "Miyakawa".
PCs to Launch Xterm or Basic applications
- UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
- Mac OSX : X11 is required.
- Windows10 : Cygwin is required.
Cygwin installation itself is explained here https://www.cygwin.com/ .
- X11 option, NT option should be installed, additionally.
These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin
Open Xterm and ssh
UNIX
- You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.
MacOS X11 and Windows Cygwin X11
- Launch Xterm.
- Type "ssh -Y controls@k1ctr*.kagra.icrr.u-tokyo.ac.jp". * can be 1 ~ 9.
- Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.