Differences between revisions 3 and 17 (spanning 14 versions)
⇤ ← Revision 3 as of 2019-12-02 00:08:53 →
Size: 736
Editor: miyoki
Comment:
← Revision 17 as of 2019-12-02 08:42:57 → ⇥
Size: 1322
Editor: miyoki
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
 * UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
   * Mac OSX : X11 is required.
   * Windows10 : Cygwin is required.
  *Cygwin installation itself is explained here https://www.cygwin.com/ .
  * X11 option, NT option should be installed, additionally.
  *These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin
 *'''Network'''
  * The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctrA", "k1ctrG" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
  * If you want to use utp cable network connection to enter DGS network in the KAGRA data analysis building, please ask "Miyoki" and "Miyakawa".
 *'''PCs to Launch Xterm or Basic applications'''
  * UNIX k1ctr1~9 servers : Prepared by DGS group in Control room and KAGRA site.
  * Mac OSX : X11 is required.
  * Windows10 : Cygwin is required.
   *Cygwin installation itself is explained here https://www.cygwin.com/ .
  * X11 option, NT option should be installed, additionally.
   *These explanation can be found in https://itcweb.cc.affrc.go.jp/affrit/documents/guide/x-window/x-win-cygwin
Line 12: Line 15:
 * Type ssh -Y controls@k1ctr1.kagra.icrr.u-tokyo.ac.jp or double click the Xterm icon in UNIX machines.
 * Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.		  *'''UNIX'''
  * You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.

 *'''MacOS X11 and Windows Cygwin X11'''
  * Launch Xterm.
  * Type "ssh -Y controls@k1ctr*.kagra.icrr.u-tokyo.ac.jp". * can be 1 ~ 9.
  * Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.

PC Preparation

  • Network

    • The network where you use PCs should be "DGS" network in KAGRA site. Wifi access points "k1ctrA", "k1ctrG" and so on are prepared at the KAGRA site. Please ask DGS group members about access pass.
    • If you want to use utp cable network connection to enter DGS network in the KAGRA data analysis building, please ask "Miyoki" and "Miyakawa".

  • PCs to Launch Xterm or Basic applications

Open Xterm and ssh

  • UNIX

    • You need not launch Xterm to use Basic Tools such as "sitemap" and so on because the direct icons are prepared.

  • MacOS X11 and Windows Cygwin X11

    • Launch Xterm.
    • Type "ssh -Y controls@k1ctr*.kagra.icrr.u-tokyo.ac.jp". * can be 1 ~ 9.
    • Some k1ctr* are in the control room, some are in KAGRA site. So select servers according to where you use, otherwise response becomes bad due to network connection.

KAGRA/Operation/Manuals/Basic/PC_Environment (last edited 2019-12-17 17:27:08 by miyoki)