Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2019-12-17 14:44:16 →
Size: 63
Editor: miyoki
Comment:
← Revision 2 as of 2019-12-17 14:44:56 → ⇥
Size: 582
Editor: miyoki
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
   * After the main LSC_LOCK guardian acquires the OBSERVATION mode, open the human_EY screen from Commissioning Dock (see the 1st attachment).
   *Turn on the left top button. It indicates the alignment time.
   *Tweak the EY alignment by the green sliders on the human_EY screen.
    *- You aim the AS port signals make darker.
    *- Open the ndscope from the same screen to check the AS DC darkness.
    *- Move EY carefully and slowly!
   * Turn off the left top button to go to the real observation mode.

  • Yarm Alignment

    1. For Wave Front Sensing Engaging
      • After the main LSC_LOCK guardian acquires the OBSERVATION mode, open the human_EY screen from Commissioning Dock (see the 1st attachment).
      • Turn on the left top button. It indicates the alignment time.
      • Tweak the EY alignment by the green sliders on the human_EY screen.
        • - You aim the AS port signals make darker.
        • - Open the ndscope from the same screen to check the AS DC darkness.
        • - Move EY carefully and slowly!
      • Turn off the left top button to go to the real observation mode.

KAGRA/Operation/Manuals/MIF/YarmAlignment (last edited 2019-12-17 15:37:25 by miyoki)