Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2018-10-09 22:27:40 →
Size: 805
Editor: YutaMichimura
Comment:
← Revision 2 as of 2018-10-09 22:28:00 → ⇥
Size: 805
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 8: Line 8:
 * Installed optics for green path from GBS1, except for green QPD boards (See [[JGW-T1808962|https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8962]] for optical layout)  * Installed optics for green path from GBS1, except for green QPD boards (See [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=8962|JGW-T1808962]] for optical layout)

20181006

Today's activities

Workers: Akutsu, Michimura, K. Tanaka

GPT part installation

  • Installed optics for green path from GBS1, except for green QPD boards (See JGW-T1808962 for optical layout)

    • we marked screw holes on optical table every 10 holes
    • the position of GST2 was 25mm too far from GLNS1, so we moved it to the default position

Next Plan

  • Install QPD boards and do the final cabling
  • Check why Gig-E camera is not working

Wanted!

  • M4-12mm (or longer) screws instead of M4-10mm for fixing mirror holders to 20mm dia. posts
  • Spacer for Gig-E camera (height is shorter than 4-inch right now)

KAGRA/Subgroups/AOS/TMSX_O3/2018-10-09 (last edited 2018-10-10 11:10:28 by TomotadaAkutsu)