Differences between revisions 2 and 3

20181012

Today's activities

Workers: Izumi, Michimura

We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.
At TMSY, we have replaced POP/POS-style periscope with Nagano-style peroscope for IR path. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope are reused for the Nagano-style periscope
- POP/POS-style periscope assembly
  - 2inch mirror mount: KM200 x2
  - Post and base: P250/M, PB4/M
  - Post fork: PF175
  - Post mounting clamp: C1511/M x2
- Nagano-style periscope assembly
  - 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
  - Post and base: P300/M, PB2/M
  - Post mounting clamp: C1511/M x2
  - Spacer: RS3M x2
The POP/POS-style periscope was brought to POS table

KAGRA/Subgroups/AOS/TMSX_O3/2018-11-09 (last edited 2018-11-10 01:32:09 by YutaMichimura)

-  ⇤ ← Revision 2 as of 2018-11-10 00:23:14 → 
  Size: 202
  Editor: YutaMichimura
  Comment:
+   ← Revision 3 as of 2018-11-10 00:52:31 → ⇥
  Size: 1037
  Editor: YutaMichimura
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
+== Transporting some optics to Y-end ==
 * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.
 * At TMSY, we have replaced POP/POS-style periscope with Nagano-style peroscope for IR path. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope are reused for the Nagano-style periscope
  * POP/POS-style periscope assembly
   * 2inch mirror mount: KM200 x2
   * Post and base: P250/M, PB4/M
   * Post fork: PF175
   * Post mounting clamp: C1511/M x2 
  * Nagano-style periscope assembly
   * 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
   * Post and base: P300/M, PB2/M
   * Post mounting clamp: C1511/M x2
   * Spacer: RS3M x2
 * The POP/POS-style periscope was brought to POS table