Differences between revisions 2 and 5 (spanning 3 versions)
⇤ ← Revision 2 as of 2018-11-10 00:23:14 →
Size: 202
Editor: YutaMichimura
Comment:
← Revision 5 as of 2018-11-10 01:04:04 → ⇥
Size: 1157
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
== Transporting some optics to Y-end ==
 * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.

 * Oplev-QPD for TMSX-VIS and are left at TMSX.
 * At TMSY, we have replaced a periscope for IR. It was temporarily using POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope for. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.
  * POP/POS-style periscope assembly
   * 2inch mirror mount: KM200 x2
   * Post and base: P250/M, PB4/M
   * Post fork: PF175
   * Post mounting clamp: C1511/M x2
  * Nagano-style periscope assembly
   * 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
   * Post and base: P300/M, PB2/M
   * Post mounting clamp: C1511/M x2
   * Spacer: RS3M x2
 * The POP/POS-style periscope was brought to the POS table.

20181012

Today's activities

Workers: Izumi, Michimura

Transporting some optics to Y-end

  • We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.
  • Oplev-QPD for TMSX-VIS and are left at TMSX.
  • At TMSY, we have replaced a periscope for IR. It was temporarily using POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope for. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.
    • POP/POS-style periscope assembly
      • 2inch mirror mount: KM200 x2
      • Post and base: P250/M, PB4/M
      • Post fork: PF175
      • Post mounting clamp: C1511/M x2
    • Nagano-style periscope assembly
      • 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
      • Post and base: P300/M, PB2/M
      • Post mounting clamp: C1511/M x2
      • Spacer: RS3M x2
  • The POP/POS-style periscope was brought to the POS table.

Next Plan and Wanted!

KAGRA/Subgroups/AOS/TMSX_O3/2018-11-09 (last edited 2018-11-10 01:32:09 by YutaMichimura)