Differences between revisions 3 and 13 (spanning 10 versions)
⇤ ← Revision 3 as of 2018-11-10 00:52:31 →
Size: 1037
Editor: YutaMichimura
Comment:
← Revision 13 as of 2018-11-10 01:32:09 → ⇥
Size: 1428
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= 20181012 =
 * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=xxxx]]		 = 20181109 =
 * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=6938]]
Line 8: Line 8:
 * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.
 * At TMSY, we have replaced POP/POS-style periscope with Nagano-style peroscope for IR path. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope are reused for the Nagano-style periscope		  * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs, Japan Laser, and 20mm diameter optics posts, and optics stored in the desiccator.
{{attachment:TMSYcardboardbox.JPG|TMSYcardboardbox|width="400" }}
 * Oplev-QPD for TMSX-VIS and ND filters are left at TMSX.
{{attachment:TMSXoptics.JPG|TMSXoptics|width="400" }}
 * At TMSY, we have replaced a periscope for IR. It was temporarily POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.
Line 20: Line 23:
 * The POP/POS-style periscope was brought to POS table {{attachment:TMSYperiscopes.JPG|TMSYperiscopes|width="400" }}
 * Desiccator for TMSY table was unpacked and installed.
 * The POP/POS-style periscope was brought to the POS table.

20181109

Today's activities

Workers: Izumi, Michimura

Transporting some optics to Y-end

  • We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs, Japan Laser, and 20mm diameter optics posts, and optics stored in the desiccator.

TMSYcardboardbox

  • Oplev-QPD for TMSX-VIS and ND filters are left at TMSX.

TMSXoptics

  • At TMSY, we have replaced a periscope for IR. It was temporarily POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.
    • POP/POS-style periscope assembly
      • 2inch mirror mount: KM200 x2
      • Post and base: P250/M, PB4/M
      • Post fork: PF175
      • Post mounting clamp: C1511/M x2
    • Nagano-style periscope assembly
      • 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
      • Post and base: P300/M, PB2/M
      • Post mounting clamp: C1511/M x2
      • Spacer: RS3M x2

TMSYperiscopes

  • Desiccator for TMSY table was unpacked and installed.
  • The POP/POS-style periscope was brought to the POS table.

Next Plan and Wanted!

KAGRA/Subgroups/AOS/TMSX_O3/2018-11-09 (last edited 2018-11-10 01:32:09 by YutaMichimura)