Differences between revisions 8 and 13 (spanning 5 versions)
⇤ ← Revision 8 as of 2018-11-10 01:10:00 →
Size: 1398
Editor: YutaMichimura
Comment:
← Revision 13 as of 2018-11-10 01:32:09 → ⇥
Size: 1428
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
 * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=xxxx]]  * [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=6938]]
Line 8: Line 8:
 * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs and Japan Laser, and optics stored in the desiccator.  * We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs, Japan Laser, and 20mm diameter optics posts, and optics stored in the desiccator.
Line 10: Line 10:
 * Oplev-QPD for TMSX-VIS and are left at TMSX.  * Oplev-QPD for TMSX-VIS and ND filters are left at TMSX.
Line 12: Line 12:
 * At TMSY, we have replaced a periscope for IR. It was temporarily using POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope for. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.  * At TMSY, we have replaced a periscope for IR. It was temporarily POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.

20181109

Today's activities

Workers: Izumi, Michimura

Transporting some optics to Y-end

  • We have transported TMSY optics from Xend to Yend. Four cardboard boxes from Thorlabs, Japan Laser, and 20mm diameter optics posts, and optics stored in the desiccator.

TMSYcardboardbox

  • Oplev-QPD for TMSX-VIS and ND filters are left at TMSX.

TMSXoptics

  • At TMSY, we have replaced a periscope for IR. It was temporarily POP/POS-style periscope, but we replaced it to a real Nagano-style peroscope. The periscope is placed at the preliminary position. The mirrors on POP/POS-style periscope were reused for the Nagano-style periscope.
    • POP/POS-style periscope assembly
      • 2inch mirror mount: KM200 x2
      • Post and base: P250/M, PB4/M
      • Post fork: PF175
      • Post mounting clamp: C1511/M x2
    • Nagano-style periscope assembly
      • 2inch mirror mount: SN200-F2K, SN200-F2K-LH (Newport)
      • Post and base: P300/M, PB2/M
      • Post mounting clamp: C1511/M x2
      • Spacer: RS3M x2

TMSYperiscopes

  • Desiccator for TMSY table was unpacked and installed.
  • The POP/POS-style periscope was brought to the POS table.

Next Plan and Wanted!

KAGRA/Subgroups/AOS/TMSX_O3/2018-11-09 (last edited 2018-11-10 01:32:09 by YutaMichimura)