Differences between revisions 1 and 4 (spanning 3 versions)

20190205

[[]]

Today's activities

Workers: Akutsu, Nagano, K. Tanaka

BRT part

There were some homeworks left from the last March; see here.

Optics name	Type of the optics	The holder	Note
1st steering mirror -> STM3	Newly opened "CVI HM-2037-45"	Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG	I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205
Harmonic BS -> HBS	HBSY21	Polaris-K2S1 + washed imo M6 screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-40100
2nd steering mirror -> GST0	Newly opened "TFMQSP-50.8C10-20-532/1064-0/26D"	Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG	I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205
Collimation lens for green (3rd BRT lens for green) -> BRT3	SLB-50.8-200NM	VLHG-50.8 + washed M6 imo screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-2460	VBSP-2460 should be replaced to VBSP-40100 later.

Next Plan

Wanted!

Laser level

KAGRA/Subgroups/AOS/TMSY_O3/2019-02-05 (last edited 2019-02-06 00:32:40 by TomotadaAkutsu)

-  ⇤ ← Revision 1 as of 2019-02-05 18:53:25 → 
  Size: 318
  Editor: TomotadaAkutsu
  Comment:
+   ← Revision 4 as of 2019-02-05 19:05:10 → ⇥
  Size: 1604
  Editor: TomotadaAkutsu
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 10:
+|| Optics name || Type of the optics || The holder || Note ||
|| 1st steering mirror -> '''''STM3''''' || Newly opened "CVI HM-2037-45" || Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG|| I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205||
|| Harmonic BS -> '''''HBS'''''|| HBSY21|| Polaris-K2S1 + washed imo M6 screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-40100|| ||
|| 2nd steering mirror -> '''''GST0'''''  || Newly opened "TFMQSP-50.8C10-20-532/1064-0/26D" ||Polaris-K2S1 + washed but not vented M4 screw + ME-KAGRA-1704107-A-DWG  || I determied to leave the M4 screw without a vent hole, as there is a groove on the pedestal. The outer diameter of the optics was wiped to remove the pencil memo. The original one (TFVMQ-50.8C10-20-W1D-532/1064-ARS-30/40D) was stocked in the desiccator as of 20190205||
|| Collimation lens for green (3rd BRT lens for green) -> '''''BRT3'''''|| SLB-50.8-200NM|| VLHG-50.8 + washed M6 imo screw + OptoSigma VRO-12-100 + VRS-12-100 + VBSP-2460 || VBSP-2460 should be replaced to VBSP-40100 later.||