= 2018/12/10 18:00 =
== Agenda ==
 * Yuki: Schedule (10 min)
 * Y.Takahiro: Software (10min)
 * Takaaki: Commissioning (10min) [[attachment:CAL_yokozawa_181217_ver2.pdf|pdf]]
 * Chihiro: Debug plan of Xend (Run03; 10min)
 * U.Takafumi and Yuk: Characterization of  Actuator(10min)[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9521|JGW]]

== MEMO ==
==== Software ====
 * Darkhan and Takahiro Y. prepared the dedicated network switch for the DMT.

 * k1bcst0 is connected to DAQ(10Gbps optical fiber), DGS(1Gbps copper) and DMT(1Gbps copper).
   * I set that online frames flow on the DMT network, but they have flowed on the DGS network yet. (Problem on DGS side)

 * cal-gst is connected to DMT(1Gbps copper), DMG(1Gbps copper) and DMG(10Gbps optical fiber).
   * 10Gbps NIC for DMG is not available on cal-gst. (Problem on CAL side)
   * After 10Gbps NIC can be activated, one of the 1Gbps copper cable will be connected to DGS network. (cal-gst has only two NIC for 1Gbps.)