Differences between revisions 3 and 4
Revision 3 as of 2020-04-24 23:08:04
Size: 641
Comment:
Revision 4 as of 2020-04-24 23:08:47
Size: 635
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:

* 1271614656, K1:CAL-PCAL_EX_0_INJ_V_EXC

* 1271615520, K1:LSC-DARM2_EXC

* 1271616384, K1:VIS-ETMX_TM_SUMOUT_L_EXC

* 1271617248, K1:VIS-ETMY_TM_SUMOUT_L_EXC (1st) : Stopped because of the lockloss just after starting.

* 1271617856, K1:VIS-ETMY_TM_SUMOUT_L_EXC (2nd)
  * 1271614656, K1:CAL-PCAL_EX_0_INJ_V_EXC
  * 1271615520, K1:LSC-DARM2_EXC
  * 1271616384, K1:VIS-ETMX_TM_SUMOUT_L_EXC
  * 1271617248, K1:VIS-ETMY_TM_SUMOUT_L_EXC (1st) : Stopped  just after starting because of the lockloss.
  * 1271617856, K1:VIS-ETMY_TM_SUMOUT_L_EXC (2nd)
Line 17: Line 11:

 

Memo of Hardware Injection

* Start Timing, EXC-channel

  • 1271614656, K1:CAL-PCAL_EX_0_INJ_V_EXC
  • 1271615520, K1:LSC-DARM2_EXC
  • 1271616384, K1:VIS-ETMX_TM_SUMOUT_L_EXC
  • 1271617248, K1:VIS-ETMY_TM_SUMOUT_L_EXC (1st) : Stopped just after starting because of the lockloss.
  • 1271617856, K1:VIS-ETMY_TM_SUMOUT_L_EXC (2nd)

After sending 6 seconds of zeroes to signal injection stream, we sent the 4 sec template signal, 12 sec of zeros, 4 sec template, 12 sec of zeros, ... The peaks were located in the center of each templates. It means that the peaks of injected signal were located on GPS0=8+16*n (n=0,1,2,...)

KAGRA/Subgroups/CAL/HW-Inj (last edited 2020-04-25 00:24:14 by takahiro.sawada)