Size: 12458
Comment:
|
Size: 13494
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 64: | Line 64: |
||Head set ||several ||Not known ||Need ||No ||No ||N/A || || | ||Head set ||several ||Not known ||No ||Yes ||No ||N/A || || |
Line 70: | Line 70: |
||Function generator ||1 ||AFG3022C ||No? ||No ||Yes ||N/A || || | ||Function generator ||1 ||AFG3022C ||No ||No ||Yes ||N/A || || |
Line 80: | Line 80: |
||Earplug ||several ||Not known ||Need ||No ||No ||N/A ||([[https://www.monotaro.com/p/3709/4854/|example]]) || ||Rubber stack ||8 ||Not known ||Need ||No ||No ||N/A ||(If possible. For example, [[https://jp.misumi-ec.com/vona2/detail/221000018475/|KE-25 (Misumi)]].) || |
||Earplug ||6 ||Not known ||No ||Yes ||No ||N/A ||([[https://www.monotaro.com/p/3709/4854/|example]]) || ||Rubber stack ||8 ||Not known ||No ||Yes ||No ||N/A ||(If possible. For example, [[https://jp.misumi-ec.com/vona2/detail/221000018475/|KE-25 (Misumi)]].) || |
Line 83: | Line 83: |
||Impulse hammer||1 ||GK-4110G20 ||No ||Yes ||No ||N/A || (Maybe not necessary in phase1)|| | |
Line 87: | Line 87: |
||Large Coil ||2 ||Not known ||Need ||No ||No ||N/A ||a few Ohms, ~1 m dia. || | ||Large Coil ||1 ||Not known ||No ||Yes ||No ||N/A ||a few Ohms, ~1 m dia. || |
Line 89: | Line 89: |
||Magnetometer ||2 ||Mag-13MCL100 +amplifier ||No ||No ||Yes ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|S1707535]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7536|7536]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7537|7537]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7538|7538]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7539|7539]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7540|S1707540(Amp)]] ||[[http://www.bartington.com/Literaturepdf/Datasheets/Mag-13%20DS3143.pdf|URL (pdf)]] || | ||Magnetometer ||2 ||Mag-13MCL100 +amplifier ||No ||No ||Yes ||[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7535|S1707535]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7536|7536]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7537|7537]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7538|7538]],[[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=7539|7539]]||[[http://www.bartington.com/Literaturepdf/Datasheets/Mag-13%20DS3143.pdf|URL (pdf)]] || |
Line 96: | Line 96: |
||Small PZT shaker ||a few ||Not known ||Need ||No ||No ||N/A || || | ||Small shaker ||2 ||LW142.FS-2 ||No ||Yes ||No ||N/A || || |
Line 122: | Line 122: |
* photosensor for toy pendulum (リハーサルのインジェクション対象): 1.12 V/mm (@4.2mm(micrometer), from measurement) |
|
Line 140: | Line 142: |
== (Part of) to do list == | == To do list == Currently, to do list is managed in github project (github issue): https://github.com/gw-analysis/detector-characterization Current milestone: PEM injection rehearsal (by 2018/02/16) |
Line 142: | Line 147: |
* アナログ回路(~10 kHzの早いインジェクション用)を作る。 * 確保できるチャンネル数の中で、やること/できることを具体化する。 * センサー・アクチュエータ類のキャリブレーション。 * 主にコイル(他はマニュアルを信じる) --> 長野 * 磁束計Mag13のセットアップ --> 田中 * コイルの作製 --> 長野 * MEDM画面の作成 --> 誰か+シフト * フィルターバンクに各センサーのキャリブレーションファクターを入れておく。 * イメージはこんな感じ。[[attachment:MEDMdesign_PEMinjectionVer2.png]] * エンドでの作業手順(2階へのものの搬入、クリーンブース内の中2階へのアクセス方法等)をTypeAチームに相談する。 * Xエンド2階へはT3で、Yエンド2階へはキャタピラ付きのキャリー(名称不明)で坂を登って運び入れている(by奥富さん)。 == Results == * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/result_20171226|Rehearsal of rehearsal on 26th Dec., 2017]] == Meetings == * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171206|2017/12/06 Kick-off meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171212|2017/12/12 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171219|2017/12/19 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171225|2017/12/25 Small meeting for rehearsal of rehearsal]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171228|2017/12/28 Evaluation meeting of rehearsal of rehearsal]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20180116|2018/01/16 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20180123|2018/01/23 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20180208|2018/02/08 Detchar meeting (only for PEM injection)]] Next meeting is 2018/2/8 13:00-- Detchar meeting == What has been done == * Consider how many DAC, ADC, CH are required at each measurement point. * 大きい加振機の所在を麻生さんに確認。 * Differential input/output of CDS. (CDSの差動入出力への対応。) * Consider how many people are required. * 解析コードを作る人手を確保。 * 磁束計の検討 --> 長野 * ホワイトニングフィルターの確保 --> 端山 * 山本さんにCALで似たようなコードを作ってないか確認する。 |
|
Line 152: | Line 193: |
* アナログ回路(~10 kHzの早いインジェクション用)を作る。 | |
Line 154: | Line 194: |
* 確保できるチャンネル数の中で、やること/できることを具体化する。 | |
Line 156: | Line 195: |
* センサー・アクチュエータ類のキャリブレーション。 * 主にコイル(他はマニュアルを信じる) --> 長野 * 磁束計のセットアップ --> 田中 |
|
Line 161: | Line 197: |
* コイルの作製 --> 長野 | |
Line 163: | Line 198: |
* MEDM画面の作成 --> 誰か+シフト * フィルターバンクに各センサーのキャリブレーションファクターを入れておく。 * イメージはこんな感じ。[[attachment:MEDMdesign_PEMinjectionVer2.png]] * エンドでの作業手順(2階へのものの搬入、クリーンブース内の中2階へのアクセス方法等)をTypeAチームに相談する。 * Xエンド2階へはT3で、Yエンド2階へはキャタピラ付きのキャリー(名称不明)で坂を登って運び入れている(by奥富さん)。 |
|
Line 169: | Line 199: |
* アンプ(QSC RMX5050a)の入出力コネクターを作る。 * 入力:BNC-U字端子(止めネジ径:M3?)+ U字端子-U字端子(GNDと-の接続用) * 出力:BNC-バナナプラグ(約φ4) == Results == * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/result_20171226|Rehearsal of rehearsal on 26th Dec., 2017]] == Meetings == * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171206|2017/12/06 Kick-off meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171212|2017/12/12 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171219|2017/12/19 Detchar meeting]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171225|2017/12/25 Small meeting for rehearsal of rehearsal]] * [[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/meeting_20171228|2017/12/28 Evaluation meeting of rehearsal of rehearsal]] Next meeting is 2018/1/16 13:00-- Detchar meeting == What has been done == * Consider how many DAC, ADC, CH are required at each measurement point. * 大きい加振機の所在を麻生さんに確認。 * Differential input/output of CDS. (CDSの差動入出力への対応。) * Consider how many people are required. * 解析コードを作る人手を確保。 * 磁束計の検討 --> 長野 * ホワイトニングフィルターの確保 --> 端山 * 山本さんにCALで似たようなコードを作ってないか確認する。 |
* アンプ(QSC RMX5050a)の入出力コネクターを作る。(2セットずつ) * 入力:BNC-U字端子(止めネジ径:M3?)+ U字端子-U字端子(GNDと-の接続用)[[https://jp.rs-online.com/web/p/crimp-ring-terminals/6048086/|これとか]] * 出力:BNC-バナナプラグ(約φ4)[[https://jp.rs-online.com/web/p/bnc-test-leads/1759315/|これとか]] |
Line 196: | Line 204: |
[[http://gwwiki.icrr.u-tokyo.ac.jp/JGWwiki/KAGRA/Subgroups/DET/PEMinjection/bKAGRA-phase1/paper_plan|Only for collaboraters]] |
PEM injection in bKAGRA phase1
(Description will be translated to English at some point)
Aims
In bKAGRA phase1,
- Investigate the projection of the environmental noise effect to the sensitivity of KAGRA interferometer
- Characterize the effect of the scattering light
- Morphologically study the environmental noise waveform
(bKAGRA phase1 における、
- 干渉計感度への環境雑音の影響のプロジェクション
- 散乱光のキャラクタリゼーション
- 雑音の形態学的スタディ)
Injection types
- Acoustic injection (AcI)
- Magnetic injection (MaI)
- Shaking injection (ShI)
What we want to do
Necessary
- Measuring coupling functions between environmental noise and interferometer signal
- Measuring environmental noise using several sensors
- Spectrogram of the interferometer signal during injection
If possible
- Narrow down coupling locations
- Narrow down environmental noise source locations
- Switch off test
- Identify line noise sources
- RF noise measurement around RF modulation sideband frequencies.
Candidates of measurement points
- PSL
- IMC (mirrors, refl table)
- IFI
- PRM
- BS
- ETMX/Y (1F,2F)
- TMS (both end)
- WAB
- Arms
(including racks of each points for control and DAQ.)
Schedule
(VERY ROUGH)
- 2017/12/06 Project started
- 2017/12/26 Rehearsal of rehearsal
- Before bKAGRA phase1 run (Detailed date has not been fixed): Preparation
- 2018/01/11-12: Preparation of reharsal
- 2018/02/13-15 (option 2/16): Rehearsal of PEM injection (end-to-end test, maybe without actual injection)
- After bKAGRA phase1 run (Detailed date has not been fixed): Injection test in tunnel (4 days)
- After injection test: Analysis, make report, (if possible) write paper
Sensors and instruments information
Common
Items |
Numbers |
Part Number |
Need to order |
Ordered |
We have |
JGW S-number |
Comment |
Amplifier |
1 |
QSC RMX5050a |
No |
No |
Yes |
|
|
Head set |
several |
Not known |
No |
Yes |
No |
N/A |
|
Small accelerometer |
several |
KISTLER Accelerometer Type 8640A5 |
No |
No |
Yes |
|
|
Laser accelerometer |
1 |
Not known |
No |
No |
Yes? |
N/A |
RION |
Clay(?) to fix accelerometer |
a few |
Not known |
No |
No |
Yes? |
N/A |
|
Cables and connectors |
many |
Not known |
Partially need? |
No |
Partially no? |
N/A |
|
Low noise filter |
1 |
Not known |
Need |
No |
No |
N/A |
Like SR560. Hand made? |
Function generator |
1 |
AFG3022C |
No |
No |
Yes |
N/A |
|
Acoustic injection
Items |
Numbers |
Part Number |
Need to order |
Ordered |
We have |
JGW S-number |
Comment |
Large speaker |
2 |
JBL JRX212 |
No |
No |
Yes |
||
Small speaker (PZT) |
1 |
Not known |
Need |
No |
No |
N/A |
(If possible) |
Microphone |
1 |
B&K 4188 + 2671 (case) + 1704 (pre-amp) |
No |
No |
Yes |
N/A |
|
MIcrophone2 |
2 |
AT-VD6 + AT-MA2 (amp) |
No |
No |
Yes |
|
|
Seismometer |
1 |
Trillium compact 120-SV1 |
No |
No |
Yes |
|
|
Earplug |
6 |
Not known |
No |
Yes |
No |
N/A |
(example) |
Rubber stack |
8 |
Not known |
No |
Yes |
No |
N/A |
(If possible. For example, KE-25 (Misumi).) |
Horn |
1 |
Not known |
Need |
No |
No |
N/A |
|
Impulse hammer |
1 |
GK-4110G20 |
No |
Yes |
No |
N/A |
(Maybe not necessary in phase1) |
Magnetic injection
Items |
Numbers |
Part Number |
Need to order |
Ordered |
We have |
JGW S-number |
Comment |
Large Coil |
1 |
Not known |
No |
Yes |
No |
N/A |
a few Ohms, ~1 m dia. |
Small Coil |
1 |
Not known |
Need |
No |
No |
N/A |
(If possible) |
Magnetometer |
2 |
Mag-13MCL100 +amplifier |
No |
No |
Yes |
||
Small magnetometer |
1 |
Mag649 |
No |
No |
Yes |
N/A |
Ando lab's instrument, 3 axes can be measured |
Shaker injection
Items |
Numbers |
Part Number |
Need to order |
Ordered |
We have |
JGW S-number |
Comment |
Large Magnet coil shaker |
1 |
Not known |
No |
No |
Yes |
N/A |
NAOJ |
Small shaker |
2 |
LW142.FS-2 |
No |
Yes |
No |
N/A |
|
Mallet |
1 |
Not known |
No |
Yes |
Yes |
N/A |
|
Others
Items |
Numbers |
Part Number |
Need to order |
Ordered |
We have |
JGW S-number |
Comment |
RF antenna |
2 |
Not known |
Need |
No |
No |
N/A |
Could be made ourselves? |
RF signal amplifier |
2 |
Not known |
Need |
No |
No |
N/A |
Could be made ourselves? |
RF generator |
1 |
Not known |
Need |
No |
No |
N/A |
(If possible. Can Moku:Lab be used?) |
RF spectrum analyzer |
1 |
Not known |
No |
No |
Yes |
N/A |
Moku:Lab |
To be prepared
- CDS (Real time model, DAC, ADC, DQ)
- Calibration (Sensors, DAC, ADC)
ADCの入力インピーダンスは10 kΩ (ref. JGW-T1200779 or Shoda-san's PhD thesis.)
- Analysis code to calculate coupling function (peaks, comb, broad)
- Spectrogram tools
- MEDM
Calibration
ADC: (for single-ended sensors) 20/215 V/count, (for differential sensors) 10/215 V/count
- input impedance 10 kΩ
- Small magnetometer (Mag649, Range +/-100 uT): 30 mV/uT (from manual)
Microphone (BRÜEL & KJÆR 4188): 31.6 mV/Pa (from manual)
- Microphone2 (AUDIO-TECHNICA AT-VD6): ~320 mV/Pa (with Max gain, from measurement)
- photosensor for toy pendulum (リハーサルのインジェクション対象): 1.12 V/mm (@4.2mm(micrometer), from measurement)
Number of usable channel for each rack
★ 最低限なにかしらのDAQがほしい場所
- MC、PRエリア(IMC0ラックに寄生?)
- BS、SRエリア(PR2ラックに寄生?+追加のADCはここ)
- IXCエリア(WABラックに寄生?)
- IYCエリア(WABラックに寄生?)
- EXCエリア(???誰)
- EYCエリア(???誰)
- IXVエリア(TypeAラック、CryoP?)
- IYVエリア(TypeAラック、CryoP?)
- EXVエリア(TypeAラック、CryoP?)
- EYVエリア(TypeAラック、CryoP?)
- Xアーム (PX1ラックに寄生?)
- BNCの配線を考えると、コレぐらいのエリアが最低限で現実的。
- 最初はざっくり10枚ADCがほしいとリクエストしてみましたが、無理でした。
To do list
Currently, to do list is managed in github project (github issue): https://github.com/gw-analysis/detector-characterization
Current milestone: PEM injection rehearsal (by 2018/02/16)
- Obtain S/N on JGWdoc for all PEM related things, e.g. sensors, actuators, amplifiers, non-standard cables.
- アナログ回路(~10 kHzの早いインジェクション用)を作る。
- 確保できるチャンネル数の中で、やること/できることを具体化する。
- センサー・アクチュエータ類のキャリブレーション。
主にコイル(他はマニュアルを信じる) --> 長野
磁束計Mag13のセットアップ --> 田中
コイルの作製 --> 長野
MEDM画面の作成 --> 誰か+シフト
- フィルターバンクに各センサーのキャリブレーションファクターを入れておく。
イメージはこんな感じ。MEDMdesign_PEMinjectionVer2.png
- エンドでの作業手順(2階へのものの搬入、クリーンブース内の中2階へのアクセス方法等)をTypeAチームに相談する。
- Xエンド2階へはT3で、Yエンド2階へはキャタピラ付きのキャリー(名称不明)で坂を登って運び入れている(by奥富さん)。
Results
Meetings
Next meeting is 2018/2/8 13:00-- Detchar meeting
What has been done
- Consider how many DAC, ADC, CH are required at each measurement point.
- 大きい加振機の所在を麻生さんに確認。
- Differential input/output of CDS. (CDSの差動入出力への対応。)
- Consider how many people are required.
- 解析コードを作る人手を確保。
磁束計の検討 --> 長野
ホワイトニングフィルターの確保 --> 端山
- 山本さんにCALで似たようなコードを作ってないか確認する。
- Calibrate sensors and actuators.
- Consider how to calibrate them.
- Consider how to connect all instruments.
- Ground problem. (各実験エリア(特にエンド)でのグラウンドの確認。)
Make analysis codes --> Hayama, Pil-jong
- Gather all required instruments listed in above tables.
持っている機器、買う必要がある機器の確認し、見積りを取る。-->長野
- 小さい加振機の検討。
各エリアで確保できるデジタルのチャンネル数の確認。--> EXC: 端山、EXV: 端山、IMC0: 三代、BS: OK
- 予行演習・本番測定の人手の確保。
ラックの状況をまとめる --> 三代
加振機の確保 --> 三代・端山
既存のセンサー・アクチュエータのリスト化 --> 端山(シフトコール)
Detcharの計算機にPython(vertualenv環境)をインストールする。-->端山・Pil-jong
- アンプ(QSC RMX5050a)の入出力コネクターを作る。(2セットずつ)
Paper plan
- 腕方向の地面振動のキャビティ的蓄積