Diff for "KAGRA/Subgroups/DET/RUN/MORNINGRUN2019"

Differences between revisions 16 and 25 (spanning 9 versions)

Summary of the morning run

Time (JST)	Time (GPS)	IFO config	Main channel	klog	state flag
2019/08/27 02:09-09:26	1250874558 - 1250900778	Yarm cavity	(1)	10135
2019/08/28 07:54-09:07	1250981658 - 1250986038	FPMI	(2)	10168
2019/08/29 07:43-08:46	1251067398 - 1251071178	FPMI	(2) (Some bug)	10184
2019/08/30 05:12-08:43	1251144738 - 1251157398	SRMI	(3) (4)(no opt gain and act eff)	10214	K1:GRD-LSC_SRFPMI_LOCK_STATE_N=2000
2019/08/31 06:43-10:00	1251236598 - 1251248418	SRMI	(3) (4)	10238	K1:GRD-LSC_SRFPMI_LOCK_STATE_N=17

Note for beginner

Time
- JST or GPS time
IFO config = Interferometer configuration
- Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
- FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement
Main channel
- We should analyze this channel as h(t) channel
- (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
  - Unit is Hz, because of calculating the IR laser frequency noise
  - Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity.
- (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
  - DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later Fixed(Due to the fail of the filter)
- (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
  - Ogaki-san and cal team sometimes update the optical efficiency and actuator efficiency
- (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
  - First opt gain and act eff measurement 2019/08/30

Summary of the morning run

Time (JST)	Time (GPS)	IFO config	Main channel	klog	Memo
2019/08/27 02:09-09:26	1250874558 - 1250900778	Yarm cavity	K1:CAL-CS_PROC_XARM_FREQUENCY_DQ	10135	Silent run
2019/08/28 07:54-09:07	1250981658 - 1250986038	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ	10168	Silent run
2019/08/29 07:43-08:46	1251067398 - 1251071178	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ (Some bug)	10184	Silent run
2019/08/30 05:12-08:43	1251144738 - 1251157398	SRMI	K1:CAL-CS_PROC_(MICH/SRCL)_DISPLACEMENT_DQ	10214	Silent run

Note for beginner

Time
- JST or GPS time
IFO config = Interferometer configuration
- Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
- FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement
Main channel
- We should analyze this channel as h(t) channel
- (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
  - Unit is Hz, because of calculating the IR laser frequency noise
  - Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity.
- (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
  - DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later Fixed(Due to the fail of the filter)
- (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
  - Ogaki-san and cal team sometimes update the optical gain and actuator efficiency
- (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
  - First optical gain and actuator efficiency by Ogaki-san and Yamat-san 2019/08/30
klog
- Information related to the run is summarized here
Memo
- What is this?
- In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
- We will write following information.
klog
- Information related to the run is summarized here
Memo
- What is this?
- In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
- We will write following information.

KAGRA/Subgroups/DET/RUN/MORNINGRUN2019 (last edited 2019-11-21 14:05:15 by chihiro.kozakai)

-  ⇤ ← Revision 16 as of 2019-08-29 12:10:22 → 
  Size: 1855
  Editor: TakaakiYokozawa
  Comment:
+   ← Revision 25 as of 2019-09-01 06:17:21 → ⇥
  Size: 4988
  Editor: TakaakiYokozawa
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-|| Time (JST)             || Time (GPS)              || IFO config  || Main channel                                   || klog                                                  || Memo       ||
|| 2019/08/27 02:09-09:26 || 1250874558 - 1250900778 || Yarm cavity || K1:CAL-CS_PROC_XARM_FREQUENCY_DQ               || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10135|10135]] || Silent run ||
|| 2019/08/28 07:54-09:07 || 1250981658 - 1250986038 || FPMI        || K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ            || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10168|10168]] || Silent run ||
|| 2019/08/29 07:43-08:46 || 1251067398 - 1251071178 || FPMI        || K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ (Some bug) || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10184|10184]] || Silent run ||
+|| Time (JST)             || Time (GPS)              || IFO config  || Main channel                         || klog                                                  || state flag                          ||
|| 2019/08/27 02:09-09:26 || 1250874558 - 1250900778 || Yarm cavity || (1)                                  || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10135|10135]] ||                                     ||
|| 2019/08/28 07:54-09:07 || 1250981658 - 1250986038 || FPMI        || (2)                                  || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10168|10168]] ||                                     ||
|| 2019/08/29 07:43-08:46 || 1251067398 - 1251071178 || FPMI        || (2) (Some bug)                       || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10184|10184]] ||                                     ||
|| 2019/08/30 05:12-08:43 || 1251144738 - 1251157398 || SRMI        || (3) (4)(no opt gain and act eff)     || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10214|10214]] || K1:GRD-LSC_SRFPMI_LOCK_STATE_N=2000 ||
|| 2019/08/31 06:43-10:00 || 1251236598 - 1251248418 || SRMI        || (3) (4)                              || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10238|10238]] || K1:GRD-LSC_SRFPMI_LOCK_STATE_N=17   ||
-Line 19:
+Line 22:
-  * K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
+  * (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
-Line 22:
+Line 25:
-  * K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
   * DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later
+  * (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
   * --(DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later)-- Fixed(Due to the fail of the filter)
  * (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
   * Ogaki-san and cal team sometimes update the optical efficiency and actuator efficiency
  * (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
   * First opt gain and act eff measurement 2019/08/30

== Summary of the morning run ==

|| Time (JST)             || Time (GPS)              || IFO config  || Main channel                                   || klog                                                  || Memo       ||
|| 2019/08/27 02:09-09:26 || 1250874558 - 1250900778 || Yarm cavity || K1:CAL-CS_PROC_XARM_FREQUENCY_DQ               || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10135|10135]] || Silent run ||
|| 2019/08/28 07:54-09:07 || 1250981658 - 1250986038 || FPMI        || K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ            || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10168|10168]] || Silent run ||
|| 2019/08/29 07:43-08:46 || 1251067398 - 1251071178 || FPMI        || K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ (Some bug) || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10184|10184]] || Silent run ||
|| 2019/08/30 05:12-08:43 || 1251144738 - 1251157398 || SRMI        || K1:CAL-CS_PROC_(MICH/SRCL)_DISPLACEMENT_DQ     || [[http://klog.icrr.u-tokyo.ac.jp/osl/?r=10214|10214]] || Silent run ||
=== Note for beginner ===

 * Time
  * JST or GPS time

 * IFO config = Interferometer configuration
  * Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
  * FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement

 * Main channel 
  * We should analyze this channel as h(t) channel
  * (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ 
   * Unit is Hz, because of calculating the IR laser frequency noise
   * Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity. 
  * (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
   * --(DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later)-- Fixed(Due to the fail of the filter)
  * (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
   * Ogaki-san and cal team sometimes update the optical gain and actuator efficiency
  * (4) K1:CAL-CS_PROC_SRCL_DISPLACEMENT_DQ
   * First optical gain and actuator efficiency by Ogaki-san and Yamat-san 2019/08/30
-Line 32:
+Line 67:
+ * klog 
  * Information related to the run is summarized here

 * Memo 
  * What is this?
  * In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
  * We will write following information.