Diff for "KAGRA/Subgroups/DET/RUN/MORNINGRUN2019"

Differences between revisions 18 and 20 (spanning 2 versions)

Summary of the morning run

Time (JST)	Time (GPS)	IFO config	Main channel	klog	Memo
2019/08/27 02:09-09:26	1250874558 - 1250900778	Yarm cavity	K1:CAL-CS_PROC_XARM_FREQUENCY_DQ	10135	Silent run
2019/08/28 07:54-09:07	1250981658 - 1250986038	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ	10168	Silent run
2019/08/29 07:43-08:46	1251067398 - 1251071178	FPMI	K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ (Some bug)	10184	Silent run
2019/08/30 05:12-08:43	1251144738 - 1251157398	SRMI	K1:CAL-CS_PROC_(MICH/SRCL)_DISPLACEMENT_DQ	10214	Silent run

Time
- JST or GPS time
IFO config = Interferometer configuration
- Yarm cavity : Lock the Yarm cavity by feedback to the IMC length (Almost frequency noise evaluated by Yarm length)
- FPMI : Fabry-Perot Michelson interferometer. The h-of-t signal is calculated from DARM displacement
Main channel
- We should analyze this channel as h(t) channel
- (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
  - Unit is Hz, because of calculating the IR laser frequency noise
  - Even though Yarm lock, the channel name is XARM. The same strategy to keep the cavity.
- (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
  - DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later Fixed(Due to the fail of the filter)
- (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ
klog
- Information related to the run is summarized here
Memo
- What is this?
- In the future, we want to do the calibration line injection, PEM injection, add the excitation and check the noise, hardware injection, and so on.
- We will write following information.

KAGRA/Subgroups/DET/RUN/MORNINGRUN2019 (last edited 2019-11-21 14:05:15 by chihiro.kozakai)

-  ⇤ ← Revision 18 as of 2019-08-30 12:38:23 → 
  Size: 2047
  Editor: TakaakiYokozawa
  Comment:
+   ← Revision 20 as of 2019-08-31 06:56:27 → ⇥
  Size: 2142
  Editor: YoshinoriFujii
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
 || Time (JST)             || Time (GPS)              || IFO config  || Main channel                                   || klog                                                  || Memo       ||
 Line 19:
-  * K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
+  * (1) K1:CAL-CS_PROC_XARM_FREQUENCY_DQ
 Line 22:
-  * K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
   * DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later
+  * (2) K1:CAL-CS_PROC_DARM_DISPLACEMENT_DQ
   * --(DARM displacement [nm or m] there are still some bugs in the online model, I will summarize later)-- Fixed(Due to the fail of the filter)
  * (3) K1:CAL-CS_PROC_MICH_DISPLACEMENT_DQ