|
Size: 1738
Comment:
|
Size: 2197
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
| 1. Waiting for shipping the sensors. -> Implementation of sensors. 2. Drawing the box for Raspeberry Pi and sensors |
1. Sensors except for one sensor were received. -> Printed circuit board assembling will be started. 2. Drawing the box for Raspeberry Pi and sensors -> We are waiting for the test box. |
| Line 5: | Line 5: |
== Not yet decided == 1. Power cable 3 m (Internal budget will be used.) 2. LAN cable ?? m (10 m is enough?) (Which grant will be used?) 3. IP issue (KAGRA DAQ IP system) At least 12 IPs for KAGRA DAQ network are required. Please negotiate this to Miyakawa-san. 4. 12 Fiber Media Converters are required for installing. (Please check this to Miyoki-san? Miyakawa-san?) 5. Installing rack or table. (Which grant will be used?) PCR-54WM [https://www.monotaro.com/g/01406700/] |
|
| Line 10: | Line 17: |
| 1. Sensor (Raspberry Pi 3 based + EPICS) 2. Monitor map system (software: EPICS based?) |
1. Sensor (Raspberry Pi 2B based + EPICS) 2. Monitor map system (Not yet) |
| Line 33: | Line 40: |
| || February 2017 || Test at ESPEC https://www.espec.co.jp/products/trustee/ || || March 2017 || Install start at Kamioka || || May 2017 || Install end at Kamioka || |
|| February 2017 || Implementation at IMS || || March 2017 || Install at Kamioka || |
Current Status
Sensors except for one sensor were received. -> Printed circuit board assembling will be started.
Drawing the box for Raspeberry Pi and sensors -> We are waiting for the test box.
- Software: almost done. (database)
Not yet decided
- Power cable 3 m (Internal budget will be used.)
- LAN cable ?? m (10 m is enough?) (Which grant will be used?)
- IP issue (KAGRA DAQ IP system) At least 12 IPs for KAGRA DAQ network are required. Please negotiate this to Miyakawa-san.
- 12 Fiber Media Converters are required for installing. (Please check this to Miyoki-san? Miyakawa-san?)
Installing rack or table. (Which grant will be used?) PCR-54WM [https://www.monotaro.com/g/01406700/]
Aim
To monitor the tunnel environment except the center and end ares.
Construction
- Sensor (Raspberry Pi 2B based + EPICS)
- Monitor map system (Not yet)
Monitor map
We should decide the required sampling rate and resolution. Target: 10 Hz sampling
Temperature (SHT-25)
Humidity (SHT-25)
Air pressure (BM1383GLV: Rohm)
Magnetic field (AMI306R: Aichi Steel)
How many?
Every 200 m, we put the sensor. The estimated number of the sensors is 30.
Updated information: initial install number at the network point w/ wired LAN is 6 for each arm.
Special Meeting
Meeting Information w/ Miyo, Yamamoto, and Shikano on 10/27/2016
Schedule
October 2016 |
Test the sensors at IMS (#3) w Preliminary sensor |
November 2016 |
First trial sensors from IMS to Kamioka (#3) w Preliminary sensor |
December 2016 |
Adjustment / EPICS developmenet |
January 2017 |
Building up all sensors is started. |
February 2017 |
Implementation at IMS |
March 2017 |
Install at Kamioka |