Differences between revisions 1 and 5 (spanning 4 versions)
⇤ ← Revision 1 as of 2012-03-03 20:47:39 →
Size: 753
Editor: OsamuMiyakawa
Comment:
← Revision 5 as of 2013-06-10 13:43:46 → ⇥
Size: 1092
Editor: OsamuMiyakawa
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
## page was renamed from LCGT/subgroup/ifo/digital/Manual/BuildModel
Line 3: Line 4:
 * When you modified an existing model file (extension: .mdl) using Simlink on Matlab at /opt/rtcds/tst/x1/core/advLigoRTS/trunk/src/epics/simLink/, you need to rebuild the model.  * Type {{{
>rtr
}}} or {{{
>cd /opt/rtcds/rtcore/release
}}}
  * Each RTS folder under /opt/rtcds/rtscores/tags/ or /opt/rtcds/rtscores/branches/ includes
   * src/epics/simLink/
    . .mdl (RT model) files. Matlab opens these model files.
   * src/epics/simLink/lib/
    . library for RT models with Matlab. Needs to path at the beginning when Matlab open .mdl files.

 * When you modified an existing model file (extension: .mdl) using Simlink on Matlab at /opt/rtcds/rtcore/release/src/epics/simLink/, you need to rebuild the model.
Line 7: Line 19:
 * Move proper directly {{{
>cd /opt/rtcds/tst/x1/core/advLigoRTS/trunk		  * Move proper directly by typing 'rtr' or {{{
>cd /opt/rtcds/rtcore/release
Line 11: Line 23:
 * If you build x1x30 for example, {{{
>make uninstall-x1x30
>make x1x30
>make install-x1x30
>make install-daq-x1x30
>make install-screens-x1x30
}}}, instead the above, easier way is just to type {{{
./dbuild x1x30
}}} on the same directly. 'dbuiild' command is a script to make all the process above.		  * Build IOP; {{{
>make k1x01
>make install-k1x01
}}} and build RT model; {{{
>make k1vex
>make install-k1vex
}}} then, {{{
> killk1vex
>startk1x01
>startk1vex
}}} to start the new model.

----
  1. If you do not understand the meaning of modifying a model file, just stop here. Otherwise you may break whole system.

  2. Type 

    >rtr

    or 

    >cd /opt/rtcds/rtcore/release
    • Each RTS folder under /opt/rtcds/rtscores/tags/ or /opt/rtcds/rtscores/branches/ includes
      • src/epics/simLink/
        • .mdl (RT model) files. Matlab opens these model files.
      • src/epics/simLink/lib/
        • library for RT models with Matlab. Needs to path at the beginning when Matlab open .mdl files.
  3. When you modified an existing model file (extension: .mdl) using Simlink on Matlab at /opt/rtcds/rtcore/release/src/epics/simLink/, you need to rebuild the model.
  4. Make it sure you are on RT PC like standalone.

  5. Move proper directly by typing 'rtr' or 

    >cd /opt/rtcds/rtcore/release

  6. Build IOP; 

    >make k1x01
>make install-k1x01

    and build RT model; 

    >make k1vex
>make install-k1vex

    then, 

    > killk1vex
>startk1x01
>startk1vex
    to start the new model.

KAGRA/Subgroups/DGS/Manual/BuildModel (last edited 2022-02-14 17:39:48 by TakahiroYamamoto)