Differences between revisions 1 and 16 (spanning 15 versions)
⇤ ← Revision 1 as of 2013-04-02 13:18:25 →
Size: 359
Editor: OsamuMiyakawa
Comment:
← Revision 16 as of 2013-04-03 11:50:22 → ⇥
Size: 3613
Editor: OsamuMiyakawa
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
 1. Copy existing model file or make a new model file with the name which has a symbol character as 'k' or 'x' etc., for example, k1x01.mdl  * Currently the site names shown in the table below are supported.
Line 5: Line 5:
 * make the modle as {{{ ||||Assigned site symbols||
|||| ||
||site||location||
||X||tst||
||S||stn||
||K||kamioka||
||H||lho||
||L||llo||
||C||caltech||
||M||mit||
||G||geo||

----
== RT PC ==

 1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.) as, for example here, 'k1x01.mdl' under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the symbol to K1 on "site=xx"

 * build the modle you made like {{{
Line 7: Line 25:
make k1x00
make install-k1x00		 make k1x01
make install-k1x01
}}} Note that necessary directories will be made automatically under /opt/rtcds/

 * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin

  * cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
 * make fb directory under /opt/rtcds/kamioka/k1/target/
  * copy existing 'daqdrc', 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/tst/k1/target/fb
 * Make 'jobs' and 'logs' directories under fb.

 * Modify .bashrc
 * Modify /opt/rtcds/rtcds-user-env.sh as {{{
export site=tst
export ifo=x1
Line 10: Line 42:
Note that necessary directories will be made automatically.  * Modify under /etc for following files
  * Modify 'rtsystab'
  * Modify 'rc.local'
  * Modify 'awgtpman_template'
  * Modify 'gen_awgtpman_scripts.sh'
  * Modify 'init.d/awgtpman_iop'
  * Modify 'inittab'
  * Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as {{{
xinetd.d/leapconf: env = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf: env = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par
}}}
Line 12: Line 57:
 * ----

== Client WS ==

 1. Modify .cshrc for alias etc.


==== Setting autoburt ====

 1. Make directory
  * /opt/rtcds/kamioka/k1/burt
   * /opt/rtcds/kamioka/k1/burt/autoburt
    * /opt/rtcds/kamioka/k1/burt/autoburt/logs
    * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......

 * Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
  * Modify directory setting for the proper site around line 50-100.
   * Do not forget to modify $pathlength
  * Modify ifo name around line 112
  * Modify around line 326 for site name determined by IP address.

 * Run autoburt.pl automatically by {{{
crontab -e
}}} and put the following line {{{
40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl
}}}




==== Setting conlog ====

 1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
 * Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20

----
=== Bug reports ===

 * In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

=== Questions ===

 * Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?

How to change the first character on the model

  • Currently the site names shown in the table below are supported.

Assigned site symbols

site

location

X

tst

S

stn

K

kamioka

H

lho

L

llo

C

caltech

M

mit

G

geo

RT PC

  1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.) as, for example here, 'k1x01.mdl' under /opt/rtcds/rtscore/release/src/epics/simlink/
    • Open the file on Matlab, Simulink and change the symbol to K1 on "site=xx"

  2. build the modle you made like 

    cd /opt/rtcds/rtscore/release
make k1x01
make install-k1x01
    Note that necessary directories will be made automatically under /opt/rtcds/
  3. copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
    • cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
  4. make fb directory under /opt/rtcds/kamioka/k1/target/
    • copy existing 'daqdrc', 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
    • copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/tst/k1/target/fb
  5. Make 'jobs' and 'logs' directories under fb.
  6. Modify .bashrc

  7. Modify /opt/rtcds/rtcds-user-env.sh as 

    export site=tst
export ifo=x1
  8. Modify under /etc for following files
    • Modify 'rtsystab'
    • Modify 'rc.local'
    • Modify 'awgtpman_template'
    • Modify 'gen_awgtpman_scripts.sh'
    • Modify 'init.d/awgtpman_iop'
    • Modify 'inittab'

    • Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as 

      xinetd.d/leapconf:      env                     = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf:      server_args             = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf:      server_args             = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf:       env                     = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf:       server_args             = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par

Client WS

  1. Modify .cshrc for alias etc.

Setting autoburt

  1. Make directory
    • /opt/rtcds/kamioka/k1/burt
      • /opt/rtcds/kamioka/k1/burt/autoburt
        • /opt/rtcds/kamioka/k1/burt/autoburt/logs
        • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......
  2. Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
    • Modify directory setting for the proper site around line 50-100.
      • Do not forget to modify $pathlength
    • Modify ifo name around line 112
    • Modify around line 326 for site name determined by IP address.

  3. Run autoburt.pl automatically by 

    crontab -e

    and put the following line 

    40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl

Setting conlog

  1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
  2. Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20

Bug reports

  • In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

Questions

  • Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?

KAGRA/Subgroups/DGS/Manual/ChangeSymbol (last edited 2013-04-16 15:50:38 by OsamuMiyakawa)