Differences between revisions 10 and 23 (spanning 13 versions)
⇤ ← Revision 10 as of 2013-04-02 16:23:01 →
Size: 2472
Editor: OsamuMiyakawa
Comment:
← Revision 23 as of 2013-04-16 15:50:38 → ⇥
Size: 4382
Editor: OsamuMiyakawa
Comment:
Deletions are marked like this. Additions are marked like this.
Line 20: Line 20:
 1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.) as, for example here, 'k1x01.mdl' under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the symbol to K1 on "site=xx"		  1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"
Line 23: Line 23:
 * build the modle you made like {{{  * Build the modle you made on Matlab as {{{
Line 29: Line 29:
 * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin  * make bin directory under /opt/rtcds/kamioka/k1/target/gds
  * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
Line 32: Line 33:
 * make fb directory under /opt/rtcds/kamioka/k1/target/
  * copy existing 'daqdrc', 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/tst/k1/target/fb
 * Make 'jobs' and 'logs' directories under fb.
* Make fb directory under /opt/rtcds/kamioka/k1/target/
  * Make 'jobs' and 'logs' directories under 'fb'.
   * Make 'old' directories under 'logs'.

  * Copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * Copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/kamioka/k1/target/fb

 * Copy /opt/rtcds/tst/x1/scripts/daqconfig to /opt/rtcds/kamioka/k1/scripts/daqconfig
Line 44: Line 50:
  * Modify 'rc.local'
  * Modify 'awgtpman_template'
  * Modify 'gen_awgtpman_scripts.sh'
  * Modify 'init.d/awgtpman_iop'
  * Modify 'inittab'		   * Modify 'rc.local' (L35)
  * Modify 'awgtpman_template' (L18)
  * Modify 'gen_awgtpman_scripts.sh' (L15)
  * Modify 'init.d/awgtpman_iop' (L10, L12)
  * Modify 'inittab' (L59,L60)
Line 50: Line 56:
xinetd.d/leapconf: env  = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf: server_args  = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf: server_args  = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf: env  = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf: server_args  = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par		 xinetd.d/leapconf: env = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf: env = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf: server_args = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par
Line 57: Line 63:
=== Bug report ===  * Restart standalon by {{{
>sudo reboot
}}} on standalone.
  * Modify DAQ channel using daqconfig if you need, and restart
Line 59: Line 68:
 * In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...]. ----
Line 64: Line 73:
 * Modify /opt/apps/etc/gds-user-env.csh L9

==== Setting autoburt ====

 1. Make directory
  * /opt/rtcds/kamioka/k1/burt
   * /opt/rtcds/kamioka/k1/burt/autoburt
    * /opt/rtcds/kamioka/k1/burt/autoburt/logs
    * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......

 * Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
  * Modify directory setting for the proper site around line 50-100.
   * Do not forget to modify $pathlength
  * Modify ifo name around line 112
  * Modify around line 326 for site name determined by IP address.

 * Run autoburt.pl automatically by {{{
crontab -e
}}} and put the following line {{{
40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl
}}}




==== Setting conlog ====

1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
 * Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20, and copy it to /usr/lib/cgi-bin
 * Modify /opt/apps/linux64/conlog/bin/index_conlog, around line 16
 * Modify /opt/apps/linux64/conlog/bin/process_log, around line 19
 * Modify /opt/apps/linux64/conlog/bin/conlogger_running
----
=== Bug reports ===

 * In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

=== Questions ===

 * Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?

How to change the first character on the model

  • Currently the site names shown in the table below are supported.

Assigned site symbols

site

location

X

tst

S

stn

K

kamioka

H

lho

L

llo

C

caltech

M

mit

G

geo

RT PC

  1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
    • Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"

  2. Build the modle you made on Matlab as 

    cd /opt/rtcds/rtscore/release
make k1x01
make install-k1x01
    Note that necessary directories will be made automatically under /opt/rtcds/
  3. make bin directory under /opt/rtcds/kamioka/k1/target/gds
    • copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
    • cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
  4. Make fb directory under /opt/rtcds/kamioka/k1/target/
    • Make 'jobs' and 'logs' directories under 'fb'.
      • Make 'old' directories under 'logs'.
    • Copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
    • Copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/kamioka/k1/target/fb
  5. Copy /opt/rtcds/tst/x1/scripts/daqconfig to /opt/rtcds/kamioka/k1/scripts/daqconfig
  6. Modify .bashrc

  7. Modify /opt/rtcds/rtcds-user-env.sh as 

    export site=tst
export ifo=x1
  8. Modify under /etc for following files
    • Modify 'rtsystab'
    • Modify 'rc.local' (L35)
    • Modify 'awgtpman_template' (L18)
    • Modify 'gen_awgtpman_scripts.sh' (L15)
    • Modify 'init.d/awgtpman_iop' (L10, L12)
    • Modify 'inittab' (L59,L60)

    • Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as 

      xinetd.d/leapconf:      env             = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf:      server_args     = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf:      server_args     = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf:       env             = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf:       server_args     = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par

  9. Restart standalon by 

    >sudo reboot
    on standalone.
    • Modify DAQ channel using daqconfig if you need, and restart

Client WS

  1. Modify .cshrc for alias etc.
  2. Modify /opt/apps/etc/gds-user-env.csh L9

Setting autoburt

  1. Make directory
    • /opt/rtcds/kamioka/k1/burt
      • /opt/rtcds/kamioka/k1/burt/autoburt
        • /opt/rtcds/kamioka/k1/burt/autoburt/logs
        • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......
  2. Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
    • Modify directory setting for the proper site around line 50-100.
      • Do not forget to modify $pathlength
    • Modify ifo name around line 112
    • Modify around line 326 for site name determined by IP address.

  3. Run autoburt.pl automatically by 

    crontab -e

    and put the following line 

    40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl

Setting conlog

1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21

  • Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20, and copy it to /usr/lib/cgi-bin
  • Modify /opt/apps/linux64/conlog/bin/index_conlog, around line 16
  • Modify /opt/apps/linux64/conlog/bin/process_log, around line 19
  • Modify /opt/apps/linux64/conlog/bin/conlogger_running

Bug reports

  • In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

Questions

  • Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?

KAGRA/Subgroups/DGS/Manual/ChangeSymbol (last edited 2013-04-16 15:50:38 by OsamuMiyakawa)