How to change the first character on the model

• Currently the site names shown in the table below are supported.

RT PC

1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
   • Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"

2. build the modle you made on Matlab as

   cd /opt/rtcds/rtscore/release
   make k1x01
   make install-k1x01

   Note that necessary directories will be made automatically under /opt/rtcds/
3. make bin directory under /opt/rtcds/kamioka/k1/target/gds
   • copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
4. cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
5. Make 'jobs' and 'logs' directories under 'fb'.
   • Make 'old' directories under 'logs'.
   • Copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
   • Copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/kamioka/k1/target/fb
6. Make 'jobs' and 'logs' directories under fb.
7. Copy /opt/rtcds/tst/x1/scripts/daqconfig to /opt/rtcds/kamioka/k1/scripts/daqconfig
8. Modify .bashrc

9. Modify /opt/rtcds/rtcds-user-env.sh as

   export site=tst
   export ifo=x1

10. Modify under /etc for following files
    • Modify 'rtsystab'
    • Modify 'rc.local'
    • Modify 'awgtpman_template'
    • Modify 'gen_awgtpman_scripts.sh'
    • Modify 'init.d/awgtpman_iop'
    • Modify 'inittab'

    • Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as

      xinetd.d/leapconf:      env             = HOME=/opt/rtcds/kamioka/k1/target/gds
      xinetd.d/leapconf:      server_args     = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
      xinetd.d/diagconf:      server_args     = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
      xinetd.d/chnconf:       env             = HOME=/opt/rtcds/kamioka/k1/target/gds
      xinetd.d/chnconf:       server_args     = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par

Client WS

1. Modify .cshrc for alias etc.

Setting autoburt

1. Make directory
   • /opt/rtcds/kamioka/k1/burt
     • /opt/rtcds/kamioka/k1/burt/autoburt
       • /opt/rtcds/kamioka/k1/burt/autoburt/logs
       • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
         • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
         • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
         • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......
2. Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
   • Modify directory setting for the proper site around line 50-100.
     • Do not forget to modify $pathlength
   • Modify ifo name around line 112
   • Modify around line 326 for site name determined by IP address.

3. Run autoburt.pl automatically by

   crontab -e

   and put the following line

   40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl

Setting conlog

1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
2. Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20

Bug reports

• In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

Questions

• Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?