= How to change the first character on the model =

 * Currently the site names shown in the table below are supported.

||||Assigned site symbols||
|||| ||
||site||location||
||X||tst||
||S||stn||
||K||kamioka||
||H||lho||
||L||llo||
||C||caltech||
||M||mit||
||G||geo||

----
== RT PC ==

 1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"

 * Build the modle you made on Matlab as  {{{
cd /opt/rtcds/rtscore/release
make k1x01
make install-k1x01
}}} Note that necessary directories will be made automatically under /opt/rtcds/

 * make bin directory under /opt/rtcds/kamioka/k1/target/gds
  * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin

  * cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.

 * Make fb directory under /opt/rtcds/kamioka/k1/target/
  * Make 'jobs' and 'logs' directories under 'fb'.
   * Make 'old' directories under 'logs'.

  * Copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from  /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * Copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/kamioka/k1/target/fb

 * Copy /opt/rtcds/tst/x1/scripts/daqconfig to /opt/rtcds/kamioka/k1/scripts/daqconfig

 * Modify .bashrc
 * Modify /opt/rtcds/rtcds-user-env.sh as {{{
export site=tst
export ifo=x1
}}}
 * Modify under /etc for following files
  * Modify 'rtsystab'
  * Modify 'rc.local' (L35)
  * Modify 'awgtpman_template' (L18)
  * Modify 'gen_awgtpman_scripts.sh' (L15)
  * Modify 'init.d/awgtpman_iop' (L10, L12)
  * Modify 'inittab' (L59,L60)
  * Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as {{{
xinetd.d/leapconf:	env		= HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf:	server_args	= /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf:	server_args	= /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf:	env		= HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf:	server_args	= /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par
}}}

 * Restart standalon by {{{
>sudo reboot
}}} on standalone.
  * Modify DAQ channel using daqconfig if you need, and restart

----

== Client WS ==

 1. Modify .cshrc for alias etc.
 * Modify /opt/apps/etc/gds-user-env.csh L9

==== Setting autoburt ====

 1. Make directory
  * /opt/rtcds/kamioka/k1/burt
   * /opt/rtcds/kamioka/k1/burt/autoburt
    * /opt/rtcds/kamioka/k1/burt/autoburt/logs
    * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
     * /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......

 * Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
  * Modify directory setting for the proper site around line 50-100.
   * Do not forget to modify $pathlength
  * Modify ifo name around line 112
  * Modify around line 326 for site name determined by IP address.

 * Run autoburt.pl automatically by {{{
crontab -e
}}} and put the following line {{{
40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl
}}}




==== Setting conlog ====

1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
 * Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20, and copy it to /usr/lib/cgi-bin
 * Modify /opt/apps/linux64/conlog/bin/index_conlog, around line 16
 * Modify /opt/apps/linux64/conlog/bin/process_log, around line 19
 * Modify /opt/apps/linux64/conlog/bin/conlogger_running
----
=== Bug reports ===

 * In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

=== Questions ===

 * Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?