Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2013-04-11 11:20:21 →
Size: 3613
Editor: OsamuMiyakawa
Comment:
← Revision 2 as of 2013-04-11 12:49:23 → ⇥
Size: 3976
Editor: OsamuMiyakawa
Comment:
Deletions are marked like this. Additions are marked like this.
Line 18: Line 18:
== RT PC == == On master PC ==
Line 20: Line 20:
 1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.) as, for example here, 'k1x01.mdl' under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the symbol to K1 on "site=xx"		  1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
  * Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"
Line 23: Line 23:
 * build the modle you made like {{{  * build the modle you made on Matlab as {{{
Line 29: Line 29:
 * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin  * make bin directory under /opt/rtcds/kamioka/k1/target/gds
  * copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
Line 31: Line 32:
  * cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.  * cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
Line 33: Line 35:
  * copy existing 'daqdrc', 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * copy existing /opt/rtcds/tst/x1/target/fb/nds and /opt/rtcds/tst/x1/target/fb/daqd to /opt/rtcds/kamioka/k1/target/fb/ or build new nds and daqd and move to /opt/rtcds/tst/k1/target/fb		   * copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
  * copy existing /opt/rtcds/tst/x1/target/fb/nds, /opt/rtcds/tst/x1/target/fb/daqd /opt/rtcds/tst/x1/target/fb/mx_stream to /opt/rtcds/kamioka/k1/target/fb/ or build new nds, daqd, mx_stream and move to /opt/rtcds/kamioka/k1/target/fb
Line 42: Line 44:
Line 43: Line 46:
  * Modify 'rtsystab'
  * Modify 'rc.local'
  * Modify 'awgtpman_template'
  * Modify 'gen_awgtpman_scripts.sh'
  * Modify 'init.d/awgtpman_iop'
Line 56: Line 54:

 * Modify under /disklessroot/etc for following files
  * Modify 'rtsystab'
  * Modify 'rc.local'
  * Modify 'rc.reboot'
  * Modify 'awgtpman_template'
  * Modify 'gen_awgtpman_scripts.sh'
  * Modify 'init.d/awgtpman_iop'
  * Modify 'init.d/mx_stream'

How to change the first character on the model

  • Currently the site names shown in the table below are supported.

Assigned site symbols

site

location

X

tst

S

stn

K

kamioka

H

lho

L

llo

C

caltech

M

mit

G

geo

On master PC

  1. Copy existing model file or make a new model file with the name which has a symbol character ('k' or 'x' etc.), for example on this page, assuming to change from x1 to k1, and the new model is 'k1x01.mdl' located under /opt/rtcds/rtscore/release/src/epics/simlink/
    • Open the file on Matlab, Simulink and change the first line on Upper left box to "site=K1"

  2. build the modle you made on Matlab as 

    cd /opt/rtcds/rtscore/release
make k1x01
make install-k1x01
    Note that necessary directories will be made automatically under /opt/rtcds/
  3. make bin directory under /opt/rtcds/kamioka/k1/target/gds
    • copy existing awgtpman or build a new awgtpman and move to /opt/rtcds/kamioka/k1/target/gds/bin
  4. cory diag_X.conf under /opt/rtcds/tst/x1/target/gds/param to /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf and modify it.
  5. make fb directory under /opt/rtcds/kamioka/k1/target/
    • copy existing 'daqdrc'(L16, 20, 24, 25, 37, 40, 43, 47, 68), 'master', 'start_daqd.inittab', 'start_nds.inittab' from /opt/rtcds/tst/x1/target/fb to /opt/rtcds/kamioka/k1/target/fb and modify them.
    • copy existing /opt/rtcds/tst/x1/target/fb/nds, /opt/rtcds/tst/x1/target/fb/daqd /opt/rtcds/tst/x1/target/fb/mx_stream to /opt/rtcds/kamioka/k1/target/fb/ or build new nds, daqd, mx_stream and move to /opt/rtcds/kamioka/k1/target/fb
  6. Make 'jobs' and 'logs' directories under fb.
  7. Modify .bashrc

  8. Modify /opt/rtcds/rtcds-user-env.sh as 

    export site=tst
export ifo=x1
  9. Modify under /etc for following files
    • Modify 'inittab'

    • Modify xinetd.d/leapconf, xinetd.d/diagconf, xinetd.d/chnconf as 

      xinetd.d/leapconf:      env                     = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/leapconf:      server_args             = /opt/rtcds/kamioka/k1/target/gds/param/leap.conf
xinetd.d/diagconf:      server_args             = /opt/rtcds/kamioka/k1/target/gds/param/diag_K.conf
xinetd.d/chnconf:       env                     = HOME=/opt/rtcds/kamioka/k1/target/gds
xinetd.d/chnconf:       server_args             = /opt/rtcds/kamioka/k1/target/gds/param/tpchn_k1x01.par
  10. Modify under /disklessroot/etc for following files
    • Modify 'rtsystab'
    • Modify 'rc.local'
    • Modify 'rc.reboot'
    • Modify 'awgtpman_template'
    • Modify 'gen_awgtpman_scripts.sh'
    • Modify 'init.d/awgtpman_iop'
    • Modify 'init.d/mx_stream'

Client WS

  1. Modify .cshrc for alias etc.

Setting autoburt

  1. Make directory
    • /opt/rtcds/kamioka/k1/burt
      • /opt/rtcds/kamioka/k1/burt/autoburt
        • /opt/rtcds/kamioka/k1/burt/autoburt/logs
        • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2013
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2014
          • /opt/rtcds/kamioka/k1/burt/autoburt/snapshots/2015 ......
  2. Copy existing /opt/rtcds/tst/x1/burt/autoburt.pl to /opt/rtcds/kamioka/k1/burt/
    • Modify directory setting for the proper site around line 50-100.
      • Do not forget to modify $pathlength
    • Modify ifo name around line 112
    • Modify around line 326 for site name determined by IP address.

  3. Run autoburt.pl automatically by 

    crontab -e

    and put the following line 

    40 * * * * /usr/bin/perl /opt/rtcds/kamioka/k1/burt/autoburt.pl

Setting conlog

  1. Modify /opt/apps/linux64/conlog/bin/scan_adls, line 21
  2. Modify /opt/apps/linux64/conlog/bin/conlog_web.pl, around line 20

Bug reports

  • In RST2.5.2, auto generated /opt/rtcds/kamioka/k1/target/gds/param/testpoint.par has [M-node...], it should be [K-node...].

Questions

  • Why no 'pipe' files in /opt/rtcds/kamioka/k1/target/fb?

KAGRA/Subgroups/DGS/Manual/ChangeSymbolSNS (last edited 2013-04-16 15:50:16 by OsamuMiyakawa)