Software

Operating System: Linux k1boot 4.19.0-23-amd64 #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64 GNU/Linux
RTS_VERSION=5.1.4
Matlab 2019b

Hardware

RTPC: Xeon W-2245, MB X11SRL-F, 32GB memory
- CPU list
- CDS Front-end Computer and I/O Chassis PCIe Bus Layout
  - Slot 1 - IRIG-B Receiver
  - Slot 2 – PCIe Host Adapter – Fiber pair 1-2 (1st board)
  - Slot 3 – PCIe Host Adapter – Fiber pair 5-6 (3rd board)
  - Slot 4 – PCIe Host Adapter – Fiber pair 7-8 (4th board)
  - Slot 6 – Dolphin PCIe RFM adapter (IX adapters only x8, but future PX adapters are x16)
  - Slot 7 – PCIe Host Adapter – Fiber pair 3-4 (2nd board)
IO chassis
- Copy from LIGO V4(DCC T1900739)
  - Use Type-A MTP breakout cable for connecting between IO chassis and RTPC ref
- Copy from LIGO V1
  - IO chassis Top view
Dolphin: MXS824 switch, PXH830 PCIe Gen3 card
ADC
DAC

System

1 boot server, 1 data concentrator (Installed)
1 frame writer, 1 trend writer, 1 nds server (Installed) • 8 RTFE + v4 like IO chassis (in preparation)
Dolphin Gen3 (in preparation)

Rack layout

Test bench system for KAGRA controls/DAQ

How to access

(2018/9/13 updated by Osamu)

A desktop PC to access to the TEST bench is located at front-left desk in the control room.
- You can use the most left monitor. You need to select the desktop PC by switch on the bottom-right of monitor.
Or you can login to k1ctr2 directly by
- ssh -Y controls@172.16.33.21

KAGRAのテストベンチを作るにあたって

揃えなければいけないものリスト

既にある→
未発注 →

ジャンル	物品名	数	状態	備考
	ラック	1
計算機	DC	1		HDDのback upが必要
計算機	NDS	1		HDDのback upが必要
計算機	FW	1		HDDのback upが必要
計算機	TW	1
計算機	FE	2
計算機	BOOT	1		HDDのback upが必要
計算機	REMOTE	1
計算機	CLIENT WORK STATION	1
	HD timing master	1		masterじゃなくてfanoutが必要かもしれない
	IO chassis	2		あと一つたりない
	ADC	1
	DAC	1
	dolphin	1
	Gfanac	1
スイッチ	switch(TCP/IP用)	1
スイッチ	10GB main(DAQ用)	1
スイッチ	low latency(DAQ用)	1		富士通のやつ---スペアはある
	10GB SFP	1
	ミリネット	1		dc0から使い回す?

2016年7月14日時点のラック図
http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=5383

佐々木メモ

修論では評価をどうするかが一番の問題
定量的な評価
パケットロスの評価
CPUどれくらい食うか
タイミング問題の改善
DAQ，DACのOS変更による影響
診断プロシージャ

KAGRA/Subgroups/DGS/Projects/TestBench (last edited 2023-11-02 09:33:00 by shoichi.oshino)

-  ⇤ ← Revision 3 as of 2016-05-20 15:43:12 → 
  Size: 2274
  Editor: YukitsuguSasaki
  Comment:
+   ← Revision 27 as of 2023-10-19 19:12:30 → ⇥
  Size: 4027
  Editor: shoichi.oshino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-= KAGRAのテストベンチを作るにあたって =
1. 揃えなければいけないものリスト
   *既にある→ :)   
   *未発注 → <:( <<BR>>
|| ジャンル || 物品名                || 数 || 状態 || 備考                              ||
|| 　　　　 || ラック                || 1 || :) ||   6/1に納品予定                      ||
|| 計算機   ||  DC                  || 1 || <:( ||                                   ||
|| 計算機   ||  NDS                 || 1 || <:( ||                                   ||
|| 計算機   ||  FW                  || 1 || <:( ||                                   ||
|| 計算機   ||  TW                  || 1 || <:( ||                                   ||
|| 計算機   ||  FE                  || 2 || <:( ||                                   ||
|| 計算機   ||  BOOT                || 1 || <:( ||                                   ||
|| 計算機   ||  REMOTE              || 1 || <:( ||                                   ||
|| 計算機   ||  CLIENT WORK STATION || 1 || <:( ||                                   ||
|| 　　　　 ||  HD timing master           || 1 || <:( || masterじゃなくてfanoutが必要(?)      ||
|| 　　　　 ||  IO chassis                 || 2 || <:( ||                                   ||
|| 　　　　 ||  ADC                        || 1 || :) ||                                    ||
|| 　　　　 ||  DAC                        || 1 || :) ||                                    ||
|| 　　　　 ||  dolphin                    || 1 || :) ||                                    ||
|| 　　　　 ||  Gfanac                     || 1 || :) ||                                    ||
|| スイッチ ||  switch(TCP/IP用)            || 1 || <:( ||                                    ||
|| スイッチ ||  10GB main(DAQ用)            || 1 || <:( ||                                    ||
|| スイッチ ||  low latency(DAQ用)          || 1 || <:( ||  富士通のやつ---スペアはある           ||
|| 　　　　 ||  10GB SFP                   || 1 || <:( ||                                    ||
|| 　　　　 ||  ミリネット                   || 1 || <:( ||      dc0から使い回す?                ||
+<<TableOfContents(3)>>

== Software ==

 * Operating System: Linux k1boot 4.19.0-23-amd64 #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64 GNU/Linux
 * RTS_VERSION=5.1.4
 * Matlab 2019b

== Hardware ==

 * RTPC: Xeon W-2245, MB X11SRL-F, 32GB memory
  * [[https://git.ligo.org/cds/software/advligorts/-/wikis/Real-Time-Compatible-Systems|CPU list]]
  * [[https://dcc.ligo.org/DocDB/0015/T1000523/004/LIGO-T1000523-v4.pdf|CDS Front-end Computer and I/O Chassis PCIe Bus Layout]]
   * Slot 1 - IRIG-B Receiver
   * Slot 2 – PCIe Host Adapter – Fiber pair 1-2 (1st board)
   * Slot 3 – PCIe Host Adapter – Fiber pair 5-6 (3rd board)
   * Slot 4 – PCIe Host Adapter – Fiber pair 7-8 (4th board)
   * Slot 6 – Dolphin PCIe RFM adapter (IX adapters only x8, but future PX adapters are x16)
   * Slot 7 – PCIe Host Adapter – Fiber pair 3-4 (2nd board)
 * IO chassis
  * Copy from LIGO V4(DCC T1900739)
   * Use Type-A MTP breakout cable for connecting between IO chassis and RTPC [[https://community.fs.com/jp/blog/understanding-polarity-in-mpo-system.html|ref]]
  * Copy from LIGO V1
    * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1392|IO chassis Top view]]
 * Dolphin: MXS824 switch, PXH830 PCIe Gen3 card
 * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1737|ADC]]
 * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=1736|DAC]]

== System ==

 * 1 boot server, 1 data concentrator (Installed)
 * 1 frame writer, 1 trend writer, 1 nds server (Installed) • 8 RTFE + v4 like IO chassis (in preparation)
 * Dolphin Gen3 (in preparation)

=== Rack layout ===
 * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=9427|Production]]
 * [[https://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=14734|Test bench]]

-----
= Test bench system for KAGRA controls/DAQ  =

== How to access ==
(2018/9/13 updated by Osamu)

 * A desktop PC to access to the TEST bench is located at front-left desk in the control room.
  * You can use the most left monitor. You need to select the desktop PC by switch on the bottom-right of monitor.
 * Or you can login to k1ctr2 directly by 
  * {{{ssh -Y controls@172.16.33.21}}}
-Line 28:
+Line 51:
+-----
= KAGRAのテストベンチを作るにあたって =
== 揃えなければいけないものリスト ==
 * 既にある→ :)
 * 未発注 → <:( <<BR>>

||ジャンル ||物品名 ||数 ||状態 ||備考 ||
||　　　　 ||ラック ||1 || :) || ||
||計算機 ||DC ||1 || :) ||HDDのback upが必要 ||
||計算機 ||NDS ||1 || :) ||HDDのback upが必要 ||
||計算機 ||FW ||1 || :) ||HDDのback upが必要 ||
||計算機 ||TW ||1 || :) || ||
||計算機 ||FE ||2 || :) || ||
||計算機 ||BOOT ||1 || :) ||HDDのback upが必要 ||
||計算機 ||REMOTE ||1 || :) || ||
||計算機 ||CLIENT WORK STATION ||1 || :) || ||
||　　　　 ||HD timing master ||1 || :) ||masterじゃなくてfanoutが必要かもしれない ||
||　　　　 ||IO chassis ||2 || :) ||あと一つたりない ||
||　　　　 ||ADC ||1 || :) || ||
||　　　　 ||DAC ||1 || :) || ||
||　　　　 ||dolphin ||1 || :) || ||
||　　　　 ||Gfanac ||1 || :) || ||
||スイッチ ||switch(TCP/IP用) ||1 || :) || ||
||スイッチ ||10GB main(DAQ用) ||1 || :) || ||
||スイッチ ||low latency(DAQ用) ||1 || :) ||富士通のやつ---スペアはある ||
||　　　　 ||10GB SFP ||1 || :) || ||
||　　　　 ||ミリネット ||1 || :) ||dc0から使い回す? ||
-Line 30:
+Line 80:
+年7月14日時点のラック図 <<BR>> http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=5383
-Line 31:
+Line 82:
+=== 佐々木メモ ===
修論では評価をどうするかが一番の問題 <<BR>> 定量的な評価 <<BR>>  パケットロスの評価 <<BR>> CPUどれくらい食うか <<BR>> タイミング問題の改善 <<BR>> DAQ，DACのOS変更による影響 <<BR>> 診断プロシージャ <<BR>>