Size: 459
Comment:
|
Size: 830
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 11: | Line 11: |
== to change master IP == * /etc/hosts == to change slave IP == ==== 192.168.XXX ==== * /diskless/root/etc/hosts * /etc/dhcp/dhcpd 1. {{{ >sudo /etc/init.d/dhcpd restart }}}, then reboot slave PC, and check IP address was changed by /sbin/ifconfig. ==== 192.168.XXX ==== * /diskless/root/etc/rc.local : DAQIP * /diskless/root/etc/resolv.conf |
How to change IP address for SNS
>grep -r 192.168.11 /etc/*
may help to dig setting files.>sudo /etc/inet.d/networking restart
restart network setting without reboot.
to change master IP
- /etc/hosts
to change slave IP
192.168.XXX
- /diskless/root/etc/hosts
- /etc/dhcp/dhcpd
>sudo /etc/init.d/dhcpd restart
, then reboot slave PC, and check IP address was changed by /sbin/ifconfig.
192.168.XXX
- /diskless/root/etc/rc.local : DAQIP
- /diskless/root/etc/resolv.conf
Workstation
- if you see eth2 or eth3 by ifconfig, modify /etc/udev/rules.d/70-persistent-net.rules to have eth0 and eth1.
Files
- /etc/network/interfaces
- /etc/hosts
- /etc/fstab
- /home/controls/.cshrc : LIGONDSIP