Differences between revisions 1 and 4 (spanning 3 versions)
⇤ ← Revision 1 as of 2014-10-28 13:30:16 →
Size: 663
Editor: YoichiAso
Comment:
← Revision 4 as of 2014-10-29 15:59:59 → ⇥
Size: 1073
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
→　[[https://dcc.ligo.org/LIGO-D1002416/public|LIGO-D1002416-v5]](pole/zeroの位置は適宜調整されている可能性あり。参考: [[https://dcc.ligo.org/LIGO-D040180/public|LIGO-D040180]](回路図)、[[https://dcc.ligo.org/LIGO-E1200177/public|LIGO-E1200177]](LIGOでの変更履歴))
Line 21: Line 22:
→ [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=2941|JGW-T1402941]] (配線図あり)

Input Mode Cleaner Hardware

Location of the servo components

Assigned to Aso

Demodulator

Assigned to Aso

Interface between RTS and MC suspensions

MC board

Assigned to Michimura and Nakano

  • LIGOの回路図を見て，機能ブロック図を描く

→　LIGO-D1002416-v5(pole/zeroの位置は適宜調整されている可能性あり。参考: LIGO-D040180(回路図)、LIGO-E1200177(LIGOでの変更履歴))

  • KAGRAで必要な修正点はあるか?
  • AOMとの接続は単なるBNCケーブル?

Interface between MC board and RTS

Assigned to Michimura and Nakano

  • Cables (Type, Number, Length)

→ JGW-T1402941 (配線図あり)

Interface between RTS and MC suspensions

Assigned to Ohishi, Saito, Miyakawa

  • Cables (Type, Number, Length)
  • Picomotor (Driver, Software)

KAGRA/Subgroups/IOO/MC/IMCServoHardware (last edited 2015-01-05 14:03:11 by YutaMichimura)