Differences between revisions 1 and 9 (spanning 8 versions)
⇤ ← Revision 1 as of 2014-10-28 13:30:16 →
Size: 663
Editor: YoichiAso
Comment:
← Revision 9 as of 2014-11-04 00:35:59 → ⇥
Size: 1386
Editor: YutaMichimura
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
→　[[https://dcc.ligo.org/LIGO-D1002416/public|LIGO-D1002416-v5]](pole/zeroの位置は適宜調整されている可能性あり。参考: [[https://dcc.ligo.org/LIGO-D040180/public|LIGO-D040180]](回路図)、[[https://dcc.ligo.org/LIGO-E1200177/public|LIGO-E1200177]](LIGOでの変更履歴))
Line 15: Line 16:
→ なさそう。
Line 16: Line 18:
→ SMBとSMCは必要(参照: [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=2941|JGW-T1402941]])。
Line 21: Line 24:
→ MC board: [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/DocDB/ShowDocument?docid=2941|JGW-T1402941]] (配線図あり)

→ TTFSS: [[http://gwdoc.icrr.u-tokyo.ac.jp/cgi-bin/private/DocDB/ShowDocument?docid=2963|JGW-G1402963]] (配線図あり)
Line 26: Line 32:
   ToCoilDriver,?m4本,?m8本

Input Mode Cleaner Hardware

Location of the servo components

Assigned to Aso

Demodulator

Assigned to Aso

Interface between RTS and MC suspensions

MC board

Assigned to Michimura and Nakano

  • LIGOの回路図を見て，機能ブロック図を描く

→　LIGO-D1002416-v5(pole/zeroの位置は適宜調整されている可能性あり。参考: LIGO-D040180(回路図)、LIGO-E1200177(LIGOでの変更履歴))

  • KAGRAで必要な修正点はあるか?

→ なさそう。

  • AOMとの接続は単なるBNCケーブル?

→ SMBとSMCは必要(参照: JGW-T1402941)。

Interface between MC board and RTS

Assigned to Michimura and Nakano

  • Cables (Type, Number, Length)

→ MC board: JGW-T1402941 (配線図あり)

→ TTFSS: JGW-G1402963 (配線図あり)

Interface between RTS and MC suspensions

Assigned to Ohishi, Saito, Miyakawa

  • Cables (Type, Number, Length)
  • Picomotor (Driver, Software)

KAGRA/Subgroups/IOO/MC/IMCServoHardware (last edited 2015-01-05 14:03:11 by YutaMichimura)