|
Size: 1027
Comment:
|
Size: 1059
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 16: | Line 16: |
| ||OMMT1||3.76m||4.58mm|| ||OMMT2||1.33m||2.04mm|| |
||OMMT1||12.48m||4.58mm|| ||OMMT2||75.00m||2.62mm|| |
| Line 19: | Line 19: |
| ||OMC1||flat||453~456umm|| ||OMC2||flat||453~456um|| |
||OMC1||flat||432um|| ||OMC2||flat||453um(X)/456um(Y)|| |
| Line 27: | Line 27: |
| ||OMMT2-OMC1||3.16m||TBA|| | ||OMMT2-OSTM||2.96m||TBA|| ||OSTM-OMC1||0.20m||TBA|| |
Output Mode-cleaner
Meetings
Reports
Report by Kumeta (Japanese)
Report by Somiya (English)
Requirement
Shot noise increase due to the signal reduction by the OMC and residual spatial higher order modes after the OMC should be less than 5%.
Optical Design
item |
RoC |
Beam Raidus |
OMMT1 |
12.48m |
4.58mm |
OMMT2 |
75.00m |
2.62mm |
OSTM |
flat |
TBA |
OMC1 |
flat |
432um |
OMC2 |
flat |
453um(X)/456um(Y) |
OMC3 |
1.89m |
619um |
OMC4 |
1.89m |
619um |
Space |
Distance |
AOI |
SRM-OMMT1 |
6.0m |
3.0deg |
OMMT1-OMMT2 |
2.73m |
3.0deg |
OMMT2-OSTM |
2.96m |
TBA |
OSTM-OMC1 |
0.20m |
TBA |
OMC1-OMC2 |
0.370m |
TBA |
OMC2-OMC3 |
0.380m |
TBA |
OMC3-OMC4 |
0.370m |
TBA |
OMC4-OMC1 |
0.380m |
TBA |
Suspension Design
TBD
Control Scheme
TBD